What KG is a 2075 servo?
2075 | Traxxas Standard Waterproof 9kg Servo.
How much torque does a Traxxas 2075 Servo have?
The Traxxas 2075 waterproof digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing in the back yard or on the track. The 2075 is standard on many vehicles and compatible with all Traxxas 1/10 scale vehicles. It features 125 oz-in of torque with a transit time of 0.17 sec/60°.
How many teeth does a Traxxas 2075 Servo have?
Traxxas is 25 tooth Futaba style.
What is Savox?
Savox is an enthusiastic and professional manufacturer of servos for radio control applications. They design, develop, and manufacture their products, from start to finish.
How many kg is a stock Traxxas servo?
2085 | Traxxas 1/5 26.3kg Waterproof Servo
| Servo | |
|---|---|
| Servo Size: | 1/5 |
| Waterproof Casing: | Yes |
| Torque kg/cm: | 26.28 |
| Signal Type: | Digital |
How do you tell if a servo is going bad?
When the gear fails (broken tooth, hard point, etc.), the servo may get stuck, free moving or any combination. When the motor breaks (usually the brushes inside the DC motor are the culprit), the servo stops working altogether (as if it was unplugged) or overheats and burns.
How many splines does a Traxxas servo have?
Traxxas 2075 Digital High Torque Servo with Bearings, Waterproof. Uses 25 Spline Servo Horns (same As Futaba).
Are Savox servos any good?
Savox servos are the same as align servos. The majority of the bigger helis you see at the field or at funflys will have align seros in them. They are extremely reliable and inexpensive.
Are all Savox servos waterproof?
Our waterproof servos are IP67 rated. That means they are “protected against the effects of immersion in water to depths between 15 cm and 1 meter”. They cannot survive vigorous motion while submerged. All of our other servos are splash resistant.
Is the Traxxas 2075 digital high torque servo waterproof?
The Traxxas 2075 waterproof digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing in the back yard or on the track. The 2075 is standard on many vehicles and compatible with all Traxxas 1/10 scale vehicles.
How much torque does a Traxxas servo have?
1 Factory fit for drop-in installation into Traxxas Models 2 Fully waterproof, not “water resistant” 3 Compatible with Traxxas Stability Management™ ( TSM) 4 400 oz-in torque at 6.0V 5 0.15 sec/60° at 6.0V 6 Metal gears 7 Dual ball bearings 8 Brushless motor technology 9 Aluminum center case
How much torque does a brushless servo have?
A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit.
Which is BEC for Traxxas 400 red servo?
High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware. The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4.