How do I access my Huawei switch?

How do I access my Huawei switch?

For modular switches:

1. Run the interface Ethernet 0/0/0 command to enter the ETH interface view. system-view [HUAWEI] interface Ethernet 0/0/0.
2. Run the ip address ip-address { mask | mask-length } command to configure an IP address for the ETH interface.

How can I break my Huawei password?

Connect a PC to the device with a serial cable and restart the device. When the message “Press Ctrl+B to break auto startup …” is displayed, press Ctrl+B and enter the password (huawei by default) to display the BootROM main menu. Clear console login password.

How do I change my Huawei console password?

Procedure

1. On the CLI of the converged switching plane, run the following command to go to the system view:
2. Go to the user serial port view.
3. Open the user interface (UI) for changing the password.
4. Enter a new password.
5. Enter the new password again.
6. Enter the old password.
7. Submit the configuration.

How do I hard reset my Huawei switch?

Restoring the Switch to Factory Default in One-Click Mode

1. In the user view, run reset factory-configuration. The switch is reset and restored to factory default settings.
2. In the user view, run display factory-configuration reset-result. The result of the latest factory default restoration of the switch is displayed.

How do I login to a switch?

To manage your switch through a web browser in the host PC:

1. Make sure that the route between the host PC and the switch is available.
2. Launch a web browser.
3. Enter the switch’s IP address in the web browser’s address bar.
4. Enter the username and password (both admin by default) in the pop-up login window.

How do I login to a switch using console cable?

Procedure

1. Connect the DB9 female connector of the console cable to the serial port (COM) on the PC, and connect the RJ45 connector to the console port on the switch.
2. Configure terminal emulation software and log in to the Switch.
3. Configure basic information for the Switch.

What is Huawei PIN code?

Note: The default SIM PIN is 1234.

What is the default username and password for Huawei switch?

Enter the default user name admin and default password [email protected] and select the language on the login page. Then click GO to display the web-based configuration page. Configure the switch.

How do I reset my console password?

You can reset a console port password using any of the following methods: Method 1: Log in to the device using STelnet/Telnet to reset the console port password. Method 2: Reset the console port password through the BootLoader menu. Method 3: Reset the console port password through the BIOS menu.

How do I clear my Huawei settings?

Procedure

1. Clear the configuration file. Run the reset saved-configuration command to clear the next startup configuration file and cancel the configuration file used for next startup.
2. Delete configurations on an interface at a time to restore the default configurations.
3. Clear inactive configurations on the switch.

How do you access the console of a switch?

Follow these steps to manage the switch via console port:

1. Step 1 Connecting the PC to the Switch. Connect your PC to the console port of the switch with a console cable as the following figure shows.
2. Step 2 Installing PuTTY on the PC.
3. Step 3 Launching PuTTY and Configuring the PuTTY Session.
4. Step 4 Launching the CLI.

How do you check console cable is working or not?

To test if the computer COM port is functioning correctly, you can do a simple loopback test. (In a loopback test, a signal is sent from a device and returned, or looped back, to the device.) For this test, connect a serial cable to the COM port that you want to test. Then short pin 2 and pin 3 of the cable together.