What are standard fridge sizes?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
What is a good size for a refrigerator?
Refrigerator capacity ranges It varies, but a general rule of thumb is that you’ll want 4 to 6 cubic feet (cu. ft.) of refrigerator space per adult in your household, along with a little bit of extra contingency room. With full-size refrigerators ranging from 10 to 32 cu.
What width do fridges come in?
between 30 to 36 inches
Typically, the standard size for a professional-grade refrigerator falls between 30 to 36 inches width, 67 to 70 inches in height, and 29 to 35 inches in depth. When it comes to the interior, the refrigerator itself should provide you with 14 to 20 cubic feet of space.
How do I figure out the size of my refrigerator?
Grab a tape measure and measure the width, depth and height of the inside of your refrigerator. Multiply the numbers together (W x D x H) and divide the total by 1728 to get the cubic feet. For example, if you have a refrigerator that measures 30″ wide by 30″ deep by 48″ high, you multiply 30 X 30 X 48.
Do refrigerators need space around them?
Refrigerators need to breathe. If they are entirely boxed in, then there’s not much room for ventilation. When you measure the space for the refrigerator, and compare it to the size of the refrigerator, leave at least 1 inch of extra room for the back and the top of the refrigerator.
What size fridge do I need for a family of 4?
As for capacity, most manufacturers recommend 19 to 22 cubic feet for a family of four. But if you do a big weekly shopping trip or buy in bulk, you may need more—up to 30 to 33 cubic feet.
What do I do if my fridge is too tall?
Renovate the upper cabinet to accommodate the extra height of the fridge. It’s OK to simply cut the bottom half of the upper cabinet to fit over the refrigerator. If you need to remove two of them, cut them both. Take your measurements first, remove the doors, unscrew the cabinets and remove them from the wall.
What is standard depth for a refrigerator?
35- to 36-inches
Standard-depth fridges do take up more space than counter-depth models—as mentioned, generally running 35- to 36-inches deep when the doors and handles are included.
How tall is 9 cubic feet refrigerator?
65.4″
Specifications
| Brand | Frigidaire |
|---|---|
| Voltage / Frequency | 120v / 60Hz |
| Width | 23.6″ |
| Depth | 23.6″ |
| Height | 65.4″ |
What is the standard size of a fridge?
Typically, the standard size for a professional-grade refrigerator falls between 30 to 36 inches width, 67 to 70 inches in height , and 29 to 35 inches in depth . When it comes to the interior, the refrigerator itself should provide you with 14 to 20 cubic feet of space. Totally, however, you are looking at an average between 22 and 31 cubic feet.
What size fridge do you need?
Each adult will need a minimum of 4-6 cu. ft. of refrigerator space, with some extra space for holidays and other gatherings. Two people who do more cooking at home should look for a minimum of 18 cu. ft. A typical family of four will need at least 20 cu. ft., and likely more.
What size does a dorm fridge usually need to be?
Standard-size dorm refrigerators measure about 2 cubic feet — a small, square model — or approximately 4.5 cubic feet, which measures desk height. You may find dorm fridges slightly smaller than 2 cubic feet or slightly larger than 4.5 cubic feet.
How do you measure refrigerator’s dimensions?
Part 1 of 4: Measuring Width Move the refrigerator. To get many of the right measurements, you should move the refrigerator to allow access to the space. Measure the space of the opening. It might be tempting to measure the size of your current refrigerator. Use a retractable measuring tape. Repeat the measurement. Pick a store model that will allow you extra space.