How do I unlock my Cisco 7960 IP phone?

How do I unlock my Cisco 7960 IP phone?

To get to the unlock config screen, press the “Settings” button, scroll down to “Unlock Config”, and press the “Select” softkey. You will now be asked to enter the password. The default password is “cisco”. As you need to enter this password via the numeric pad, it should be entered as 222444777722266.

What does configuring IP mean?

The IP Configuration window configures the Internet Protocol parameters, allowing the device to receive and send IP packets. You can use the web browser interface to access IP addressing only if the switch already has an IP address that is reachable through your network. …

How do I setup my Cisco softphone?

ICD users must have IP Communicator open to use Finnesse.

1. Download the IP Communicator.
2. Open the .exe file.
3. Run on your PC.
4. Click the Cisco IP Communicator Wizard and follow the instructions:
5. Click Finish to complete the Audio Tuning Wizard.
6. Set up your device by clicking the Menu icon at the top.
7. Select Preferences.

How do I reset my Cisco 7960 phone?

Press and hold the # (Pound/Hashtag) key and plug the Ethernet & power cable back in. Press in order 123456789*0# to begin the reset sequence. If entered correctly, it will ask if you would like to save the network config which you will select No (option 2) and it will then continue with the reset accordingly.

How do I change the IP address on my Cisco IP Phone?

Cisco Unified IP Phone Setup Menus. Ethernet Setup Menu. WLAN Setup menu….Set IP Address Field

1. Set the DHCP Enabled option to No.
2. Scroll to the IP Address option, press Select, and enter a new IP Address.
3. Press Apply.

How do I unlock my Cisco IP Phone?

1. Unlock Settings – *, *, #.

1. Go to the Settings page of the phone.
2. While in the settings page, press *, *, # (star, star, pound) about 1/2 second apart.
3. The phone will display “Settings Unlocked” and allow you to make changes.

How do you fix an IP configuration?

Let’s look at how to resolve this issue.

1. Restart Your Computer.
2. Reboot Your Router.
3. Release and Renew Your IP Address.
4. Reset Network Protocols.
5. Check for a Manual IP Address Setting.
6. Update Your Wireless Driver.
7. Check for Malware and Antivirus Interference.
8. Increase the Number of DHCP Users.

How do I fix IP configuration failure?

How to fix the “Failed to obtain IP address” error on Android

1. Reconnect to a network.
2. Assign a static IP to your device.
3. Restart your router or a mobile device.
4. Change the encryption type.
5. Turn off MAC filtering.
6. Turn flight mode on and off.

How do I reset my IP Communicator?

The procedure is as follows:

1. Unplug the power from the phone.
2. As you plug it back it, press and hold the “#” key.
3. When those three buttons start flashing in sequence release the “#” key and enter the following code “123456789*0#”.

How do I connect my Cisco IP phone to my computer?

First, disconnect the Ethernet cable from the computer and attach it to the network port on the back of your phone. Next, use the Ethernet cable included with your phone to connect the access port on the back of your phone to your desktop computer. Your Cisco IP Phone now shares a network connection with your computer.

How do I manually configure my Cisco IP Phone 7940?

How do I configure my Cisco 7940/7960 for SIP service?

1. Press the Settings key. The Settings menu is displayed.
2. Highlight Status.
3. Press the Select soft key. The Setting Status menu is displayed.
4. Highlight Firmware Versions.
5. Press the Select soft key. The Firmware Versions panel is displayed.