Is Rubio Monocoat waterproof?
Very wear-resistant. Water- and heat-resistant, ideal for kitchens and bathrooms. Very fast curing: 80% in 2 days. A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and soap.
Can you put polyurethane over Rubio Monocoat?
More research indicates poly can be applied over the Rubio in theory but their site isn’t overly positive about doing it.
Can you apply 2 coats of Rubio Monocoat?
Because the product will not bond to itself, multiple coats are not needed. On softer species like walnut, a second application may be necessary to make sure that all areas have fully had the opportunity to react with the oil.
What is Rubio Monocoat used for?
Rubio Monocoat Hybrid Wood Protector is a genuine ‘monocoat’, suitable for coloring and protecting all exterior wood in 1 single layer. The easy application and maintenance makes this oil an exceptionally user-friendly product.
How much does Rubio cover?
Rubio Monocoat is a Single-coat application As a result, Rubio Monocoat Natural Oil Floor Finish can cover an average 400 sq. ft. of floor per liter.
Can I sand off Rubio monocoat?
Rubio usually recommend not sanding past 150 because the oil binds more effectively at lower grits. I sand to 180 and haven’t found it to be a problem. After 180, water-pop the surface by spraying liberally with water. After it dries, sand lightly again with 180 to knock down the raised grain.
Can you tint Rubio monocoat?
It is plant-based and contains 0% VOC. Each color can be mixed to create custom colors, allowing for endless color possibilities.
Can you lacquer over Rubio monocoat?
If you let the Rubio Monocoat dry overnight it would work to put lacquer over it however you could do better. The window is close enough to outdoors it would be better to use an exterior finish. I would recommend a marine grade spar varnish. The difference in finishes is the lacquer would dry harder than the spar.
Can you sand off Rubio Monocoat?
Can you use Rubio Monocoat without accelerator?
Although Part A is available without the accelerator, we strongly recommend the use of the component system – Rubio Monocoat Natural Oil 2C Parts A & B – since the oil will cure in 7 days rather than 21 days, virtually eliminating spotting, scuffing, etc. during the cure period.
Can you sand off Rubio monocoat?
What makes a Rubio monocoat a monocoat?
Rubio Monocoat is a plant-based hardwax oil wood finish that is 0% VOC. Its unique technology forms a molecular bond with the topmost fibers of the wood. This results in a durable matte finish that keeps the natural look and feel of the wood.
What do you need to know about mono coat?
Your release agent must be formulated to allow the rubber to release from the mold, never migrating to an area that will interfere with the integrity of the metal-rubber bond. Mono-Coat® offers you piece of mind with semi-permanent release agents specifically for these traditionally challenging but vital applications.
Which is the best one coat oil finish?
Rubio Monocoat is a unique and durable one coat oil finish that is plant based, and sustainable with 0% VOCs. Our Rubio Monocoat product knowledge is the best around.
How did mono coat change the rubber molding industry?
Mono-Coat® products revolutionized the rubber molding industry decades ago by being the first semi-permanent release agents available in the industry. Thousands of rubber molders worldwide benefit daily from this technological breakthrough that allowed part release from multiple curing cycles with a single release agent application.