What does Jandy AquaPure do?
The AquaPure control center converts AC power into low voltage DC current which is required by the cell to perform the electrolysis.
What is AquaPure pool?
Dissolve low levels of ordinary salt in your pool and the AquaPure cell converts the salt into chlorine. AquaPure is a self-contained, compact, purification system which fulfills all of the pool’s sanitizing needs. Utilizing ordinary salt, the electrolytic cell generates free chlorine year-round.
How do I clean my AquaPure sensor?
Turn the flow/temp/salinity sensor counterclockwise to remove it from the three-port cell. Clean the sensor contacts gently with a household cleaning pad. Rinse well with water. This should be done yearly.
How do you reset an AquaPure salt system?
Each time a flow sensor is unplugged and plugged back in again the computer inside the unit must be reset by turning the power ‘off’ and then ‘on’. Failure to do this will result in erroneous readings. within 5 seconds to store it in memory.
What does cell reversing mean on AquaPure?
AquaPure automatically cleans the Cell electrodes once every 3 hours by reversing polarity. This does not interrupt the production of Chlorine.
How much does pool salt cost?
The overall cost of salt for a saltwater pool will vary by the type of salt that you use and the size of your pool, but you can expect to pay on average between $10 and $25 per every 40 pounds of salt (or 25¢ to 63¢ per pound of salt). Some brands may even sell a 40-pound bag of pool salt for as much as $40.
What is Aquapure facial?
The Aquapure facial is an advanced form of microdermabrasion that restores the skin’s health and facial beauty. Microdermabrasion involves using an applicator with an abrasive surface to gently sand away the outer layer of the skin to rejuvenate it.
How do you turn off Jandy AquaPure?
Press the salinity button and hold it for 5 seconds. The unit will beep when it is pressed and then again after 5 seconds, this will silence the alarm for 24 hours or until the unit is turned off and on again. Turn the AquaPure off by pressing the A (down arrow) and setting CHLORINE PRODUCTION to 00%.
How do I reset my Jandy AquaPure 1400?
Turn off the system and unplug the little board and then reinstall it. Turn on the system, wait for about 5 minutes, and then hold the little white button for 5 seconds. This will calibrate the sensor.
What kind of water purification system does Jandy use?
Perfect Pool Water Naturally- Jandy proudly introduces the next generation AquaPurewater purification system. Experience a higher quality of water with an AquaPure water purification system.
How does Jandy aquapure salt water pool system work?
The Jandy AquaPure ® salt-water chlorine sanitizing systems use salt water to deliver high-performance water sanitation with uncompromised performance, reliability and hydraulic efficiency. Rely on its sturdy design and simple features to create your saltwater oasis.
How does aquapure work to purify your pool?
Chlorine is generated automatically and naturally in your pool. Once the chlorine purification work is done, it automatically converts back to salt, to be used over and over again. AquaPure is safe, economical, and environmentally friendly way to purifying your pool and spa.
What is the PureLink salt water upgrade kit?
PureLink Salt System Upgrade Kits PureLink Salt Water Systemupgrade kit includes: AquaPure chlorine generator cell, 16′ cables, 2″ unions, Sensor and Sensor Tee.