How do I reset My AcuRite?

How do I reset My AcuRite?

Hard Reset:

1. Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
2. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button for 20 seconds if applicable.
3. Reinstall the batteries in the outdoor sensor.

How do I reset AcuRite Access?

Press and hold the reset button for 20 seconds. Wait up to 10 minutes for the sensor information to come back online. If the sensor does not come back online, bring the sensor next to the Access to pair and check the sensor’s batteries.

Where is the reset button on the AcuRite weather station?

First, locate the reset button inside the battery compartment of the display unit. Press and release this button to factory reset the weather station.

How do you reset AcuRite Atlas?

Hard Reset:

1. Bring both the sensor and display unit indoors and position them side by side.
2. Remove the batteries from the sensor and change the sensor to a new ABC channel.
3. Go to the main menu by tapping the “MENU” button.
4. Select the “Sensor” or “Connections” option from the menu.
5. Select “Remove A Sensor”.

How do you clear data on AcuRite weather station?

When installation is complete, clear erroneous data from the display by pressing the “CLEAR RECORD/ RESET” button, on the back of the display inside the battery compartment.

Why is my weather station offline?

This may occur when the Weather Underground Station ID or Station Key/ Password entered into your My AcuRite® Weather Underground Sharing Profile is not correct.

How do I reset my AcuRite 06058m?

Press the check mark button twice to complete the factory reset. The display will reset itself and go to the main AcuRite logo screen. You will now be able to set up the display by following the on-screen prompts. Once that is completed, put the batteries back into the sensor.

How do I reset my AcuRite wireless thermometer?

Hard Reset:

1. Bring both the sensor and display unit together and power down by removing all batteries from each and/or removing the power cord.
2. Change the A-B-C switch on both units to a new, matching channel then press and hold the reset button on the display for 20 seconds if applicable.

How do you reset an outside thermometer?

Hard Reset Add batteries to the outdoor sensor. Re-connect the power cord or replace the batteries in the display unit. The reset button must be immediately held for 20 seconds if there is one. Keep the units together for 5 minutes or until you see a strong sensor signal.

Where can I get support for my acurite?

Support AcuRite product support is now offered exclusively through email and live chat. You can reach our U.S. based support staff by submitting a requestor by chatting with our Live Agents during business hours.

How does the acurite Weather Underground PC Connect work?

PC Connect provides an easy method to share the readings collected by a single 5-in-1 Weather Station with My AcuRite and Weather Underground, and store readings on your computer.

Where is the device ID on my acurite?

Open the PC Connect software. From the Weather Sharing section, select the check box Share my weather data. From My AcuRite Sharing, enter the 12-character Device ID of the Indoor Display. The Device ID is located on the back of the unit.