What is a trimmer stud in construction?
In a wood-framed rough opening, the stud or framing member which runs vertically from the subfloor to and supporting the structural header member, into which a door frame is fastened.
What is the definition of trimmer joist?
: a joist into which timber trimmers are framed.
What is the purpose of trimmer joist?
A trimmer joist is one of the elements of the framing that allow the load carried by the joists to be redistributed to other components. Trimmer joists are used for stairwells, around chimneys and sometimes for skylights.
What is head trimmer in construction?
Head trimmer Horizontal member above an opening, providing fixing for the top jack studs.
What does trimming mean in construction?
This consists in cutting the sides and corners of a floor tile or brick so that the joints are well joined.
What are trimming studs?
NZS 3604:2011 Timber-framed buildings defines a trimming stud as “A stud located on the side of an opening.” However, Figure 8.5 in the standard shows trimming studs going the full height from bottom plate to top plate, while a “doubling stud” from the bottom plate to the underside of the lintel actually forms the side …
What are ceiling trimmers?
Description. Ceiling trimmers are used where there is no joist to support plasterboard ceiling. Ceiling trimmers are supplied flat and are to be folded prior to installation.
What is a king and jack stud?
Jack studs and king studs Jacks, sometimes called trimmers, fit under each end of a header, and they transfer the load that the header carries down to the bottom plate and the framing beneath. Nailed to the jacks are full-height studs called king studs; they support the assembly between the plates.
What is the difference between trimmer and header?
As nouns the difference between header and trimmer is that header is the upper portion of a page (or other) layout while trimmer is one who trims, arranges, fits, or ornaments.
What is trimming in engineering?
The trimming process is the shearing of excess material from the headed configuration of complex shapes so as to obtain the final design and specifications.
What are trims used for construction?
A small yet mighty design element in a room, trim is a type of millwork used on walls for both practical and decorative purposes. “Typically, trim covers the gaps between two areas, but it can also be highly decorative, setting the style and tone of the room,” says Lowe’s Project Expert Hunter Macfarlane.
What is a framing cripple?
Cripples. Cripples are vertical framing members that support a sill or saddle. They are installed at points where a common stud would have stood if not for the window opening. Cripples provide support for the window and the sill it rests on.
What is a king stud framing?
A king stud is one of the most important framing members in building construction. These studs support tremendous amounts of weight and pressure from the other framing members in the wood-framed home. Usually placed on both sides of an opening, such as a window or door, the king stud must be solid, free of defects, straight and dry.
What is bridging framing?
Frame bridging is the “linkage of two or more ideologically congruent but structurally unconnected frames regarding a particular issue or problem” (Snow et al., 1986, p. 467). It involves the linkage of a movement to “unmobilized sentiment pools or public opinion preference clusters” (p.
What is a header framing?
header – a framing member crossing and supporting the ends of joists, studs, or rafters so as to transfer their weight to parallel joists, studs, or rafters. beam – long thick piece of wood or metal or concrete, etc., used in construction.
What is a trimmer stud?
A trimmer or trimmer stud is a component of a framed structure that provides additional support for an opening such as a door or window. Trimmers are needed to ensure that the structure remains stable and retains its structural integrity despite the creation of openings, because openings can create weak points in a structure.