How do I fix my HP memory supply error?

How do I fix my HP memory supply error?

You can clear the supply memory error in HP printers by connecting the metal contacts that are in the toner, removing any protective strips or paper jammed in the cartridge, and updating the firmware of the printer.

What is 10 1000 Supply memory error?

A supply memory error happens when the metal contacts / chip on a toner cartridge don’t correctly connect with the corresponding contacts inside the printer. The printer cannot detect the toner cartridge and displays the ‘Supply Memory Error’ message on the printer display panel.

How do I fix insufficient memory on my HP printer?

Resolution

1. Click Start, point to Settings, and then click Printers.
2. Right-click the appropriate printer icon, and then click Properties.
3. Click the Device Options tab.
4. In the Printer Memory list, click the correct setting, and then click OK.

How do I clear the 10.1000 Supply memory error?

Just take out your toner cartridge. If you find an orange color notch on the left side, just remove it. Re-insert the cartridge and restart the printer. This should resolve your issue.

How do I get rid of supply memory error?

Solution 1: Make sure that there is no packing material inside the printer

1. Openthe cartridge access door.
2. Lift up the paper packing material, but do not remove it.
3. Remove the print cartridge packing material.
4. Remove the print cartridge fromthe printer.
5. Remove the packing material from inside the printer.

How do I fix the supply memory warning on my printer?

The printer performs correctly, but ‘Supply Memory Error’ displays on the control panel. To resolve this error, make sure that there is not any packing material in the printer or on the print cartridge, or replace a defective cartridge.

How do you fix a black cartridge in use?

If a toner cartridge is installed and the message displays, use the following steps to fix the issue.

1. Step 1: Use genuine HP toner cartridges.
2. Step 2: Check for packing materials and paper.
3. Step 3: Check the printer for additional jammed paper.
4. Step 4: Clean the electric contacts on the toner cartridge.

How do I reset my HP printer memory?

1. Press the “Cancel” or “Reset” button on your HP LaserJet printer repeatedly until the printer’s display shows “Ready.”
2. Turn your HP LaserJet printer’s power switch to “Off” to clear the memory, if the printer’s display doesn’t show “Ready.” The power switch is located on the side or back of the printer.

How do I fix printer memory error?

How to Fix Supply Memory Error on Your Printer

1. Step 1: Check for Obstructions. First, remove your cartridge from the printer. Check it carefully for any packaging material that might have been left on the cartridge.
2. Step 2: Reset the printer. With the printer turned on, disconnect the power cord from the printer.

How do I clear the memory on my HP LaserJet printer?

HP LaserJet 4100 and 4101 MFP Series

1. Press “Power” to turn off the printer.
2. Press and hold “Select.”
3. Turn the printer back on while continuing to press “Select.”
4. Release “Select” when all three lights on the printer are illuminated.
5. Press and release “Select.” The memory will be reset and then the printer will restart.

How do I get rid of black ink error on my HP printer?

Resetting the printer might resolve the error.

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.