Where do I find my Shorestation model number?
First, look in the area marked to see if you can find the model number It’s usually on a yellow sticker.
How do boat lift motors work?
How does a Boat Lift Motor work? The Shore Master “Lift Mate” motor shown here, applies pressure to the outside of the large hand wheel. The tension is applied by the use of a bungee cord. A flip of the motor switch is all it takes to raise or lower the boat without any effort.
What are the parts of a boat lift?
What type of lift parts & accessories are you looking for?
- Remotes.
- Motor Pulleys & Belts.
- Boat Lift Slings.
- Floating Boat Lift Parts.
- Cable, Hanger & Rigging Parts.
- Cradles, Bunks, & Walkboards.
- Hoists, Winches & Drives.
- 4 Piling Lift Parts.
How do you measure a Shorestation boat lift?
Shore Station. Measure the length of the side rail(not including ends). Add two feet and that equals your overall length. Then Measure the inside width of the bottom of the frame in inches.
How much does a Shorestation boat lift weight?
ShoreStation Manual Boat Lift
| Manual Boat Lift Specifications | ||
|---|---|---|
| Model | Capacity | Lift Weight |
| ssv1288 | 1200 lb | 208 lbs |
| ssv1288-4 | 1200 lb | 208 lbs |
| ssv15100 | 1500 lb | 375 lbs |
Why is my boat lift not working?
Several factors can contribute to boat lift motor problems, including faulty wiring in the motor, burnt fuses, an incorrect amount of voltage to the motor, and a defective up-button, among others. A marine technician can easily repair motor problems, but a completely damaged motor will require replacing.
What is a boat lift cradle?
Cradles are the bottommost piece of the lift and span the width of a boat lift. They are made of galvanized steel or aluminum.
What type of cable is used for boat lifts?
Galvanized steel cables are the most common type of cable. Galvanized steel cable is stronger than stainless steel cable. Breaking Strength = 7,000 lbs Most commonly used cable for boat lifts.
How can I maintain my boat lift?
Maintenance Of Boat Lift Cables And Hoists 1. Wash your boat lift cables with clean fresh water after using it in salty water to help prevent corrosion or rust. 2. When using your boat lifts cables in salt water, do not leave it underneath the water for too long as it weakens the… 3. Lubricate and
What is a shore station?
Since 1959, the ShoreStation name has stood for rugged, dependable waterfront equipment. Rest assured that our boat lift systems and dock products are designed for the long haul and backed by one of the best warranties in the business. From PWC lifts to docks and canopy covers, ShoreStation takes life on the lake to the next level.
What is a boat shore station?
Re: Shore station bunks. I’m on a freshwater lake in Michigan. A shore station is a boat lift to raise the boat out of the water- 4 steel posts with a square frame in between that is raised by means of a large crank. Everyone around here has them- just figured they were commonplace- maybe they go by other names.