Where are the fuses on a Jeep Commander?

Where are the fuses on a Jeep Commander?

Fuse box location The fuse panel is located under the instrument panel just to the left of the steering column near the brake pedal (behind the cover near the OBD).

Where is the fuse for the interior?

The interior fuse box is underneath the steering column. The under-hood fuse box is in the engine compartment next to the battery. If something electrical in your vehicle stops working, the first thing you should check for is a blown fuse.

How do you open the interior fuse on a 2006 Jeep Commander?

2006 Commander XK PDC & Interior Fuse Block

1. Underdash Fuse Block Location, notice the downward openning door in driver’s kick space just behind the OBDC connection.
2. Alternately, the under dash fuse set can be accessed by dropping or removing the larger driver’s side knee panel.

How do I access my interior fuse panel?

The interior fuse box is on the driver’s lower left side. To remove the fuse box lid, pull it toward you and take it out of its hinges. The under-hood fuse box is located near the back of the engine compart- ment on the driver’s side. To open it, push the tabs as shown.

Where is the PCM located on a 2006 Jeep Commander?

Where is the transmission control module located on a Jeep Commander? Welcome to Just Answer Jeep my name is Mark. The TCM or Transmission Control Module is incorporated into the PCM on your Jeep. The PCM is attached to the right-front inner fender located in the engine compartment.

Where is the dashboard fuse located?

Find the fuse that powers your dashboard lights. Check under the hood, under the dashboard, or near or in the glove compartment. Once you find the fuse box or boxes, remove the lid and check the diagram on the underside of the lid for a fuse labeled “dash lights” or just “lights.”

How do you remove a fuse box from a dashboard?

Part 1 of 1: Removal of the fuse box

1. Materials Needed.
2. Step 1: Disconnect the battery cable.
3. Step 2: Locate and open the fuse panel.
4. Step 3: Disconnect fuse box power supply.
5. Step 4: Disconnect the panel’s housing.
6. Step 5: Remove and label the wiring harnesses.
7. Step 6: Confirm replacement and transfer fuses.

How do you open the under dash fuse box?

The interior fuse box is underneath the dashboard on the driver’s side. To open it, turn the knob as shown. All the electrical circuits in your car have fuses to protect them from a short circuit or overload. These fuses are located in two fuse boxes.

What is a PCM on a Jeep Commander?

The Powertrain Control Module (PCM) is the computer that controls most of your Jeep’s essential systems. When your PCM fails, it can cause you to lose fuel efficiency and possibly fail your state’s emission inspection.

Where is the PCM located on a Jeep Commander?

The TCM or Transmission Control Module is incorporated into the PCM on your Jeep. The PCM is attached to the right-front inner fender located in the engine compartment.

Jeep Commander (2007) – fuse box diagram. Year of production: 2007. Interior Fuses. The fuse panel is on the lower instrument panel just to the left of the steering column

When did the Jeep Commander XK come out?

The mid-size SUV Jeep Commander (XK) was produced from 2006 to 2010. In this article, you will find fuse box diagrams of Jeep Commander 2006, 2007, 2008, 2009 and 2010, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

How do you repair an interior fuse box?

1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5. Test Component – Secure the cover and test component 6. More Info.