How do I know what JST connectors I have?
JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.
What are the different types of JST connectors?
Contents
- ZH (1.5mm pitch)
- PH (2.0mm pitch)
- XH (2.5mm pitch)
- PA/XA (2.0mm / 2.5mm pitch)
- EH (2.5mm pitch)
- RCY (2.5mm pitch)
- SH/SR (1.0mm pitch)
- SHD (1.0mm pitch)
Are all JST connectors the same?
We start with the JST XH series. Its pitch of 2.5 mm is effectively identical to the 0.1″ pitch commonly found on prototyping breadboards. After the XH series, the pin pitch gets narrower, the wires get thinner, and the connectors are more fragile through PH (2.0 mm), ZH (1.5 mm), GH (1.25 mm), and SH (1.0 mm).
What is JST connector size?
2.50 mm
Connector series
| JST Series | Pin-to-Pin Pitch | Wire Size (AWG) |
|---|---|---|
| XH | 2.50 mm (0.098 in) | 30 to 22 |
| PA | 2.00 mm (0.079 in) | 28 to 22 |
| PH | 2.00 mm (0.079 in) | 32 to 24 |
| ZH | 1.50 mm (0.059 in) | 32 to 26 |
How do I know what size connector I need?
Connector size is often listed in the format OD (outer diameter) × ID (inner diameter) × L (length of barrel) and expressed in millimeters. Designations may vary between manufacturers. Coaxial plugs that have a male center pin will have another measurement, Center Pin Diameter (CPD).
What are JST connectors used for?
JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, 3D printers, and radio controlled servos.
How do I know what AC adapter I need?
The right AC adapter for your device is one with matching electrical ratings. The device’s input voltage and current must match the adapter’s output voltage and current. Check the device’s product label or user manual to see its rated voltage and current.
Is the hilitchi 560pcs compatible with JST-XHP?
Hilitchi 560Pcs 2.54mm 2/3/4/5 Pin Housing and Male/Female Pin Head Connector Adapter Plug Set Perfectly Compatible with JST-XHP Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now .
Do you need male or female connectors for JST?
Male connectors are board mount only. All the male crimp pins are useless, because all the male connector bodies are through-hole board mount. It’s not possible to make both ends of an inline connector with this kit. Pins don’t crimp well in any of my crimpers, which work fine with other JST pins. Kit needs minimum of 280 socket contacts.
How many socket contacts do you need for JST?
Pins don’t crimp well in any of my crimpers, which work fine with other JST pins. Kit needs minimum of 280 socket contacts. The kit I received is exactly what is shown on the product page. However, the kit needs a minimum of 280 female socket contacts.