How do I setup an FTP server on my Asus router?

How do I setup an FTP server on my Asus router?

1. Go to USB Application > Servers Center.
2. Turn on the Enable FTP.
3. Choose to allow the guest to login or not.
4. Configure the maximum number of the concurrent connections in the FTP. (
5. Chose the character format which set on the FTP Server.
6. Click Apply to save all the settings.
7. To press [+] to add an account for the FTP. (

How do I setup an FTP server on my router?

To set up FTP access through the Internet:

1. Launch an Internet browser from a computer or wireless device that is connected to the network.
2. Enter the router user name and password.
3. Select ADVANCED > USB Storage > Advanced Settings.
4. Select the FTP (via Internet) check box.
5. Click the Apply button.

How do I open an FTP port on my router?

NOTE: Images may vary depending on the model and firmware version of your Linksys router.

1. Access the router’s web-based setup page.
2. On the Setup page, click Applications & Gaming.
3. Under Single Port Forwarding sub-tab, select FTP for Application.
4. Enter the IP Address of your FTP server under To IP Address.

What is character set on FTP server?

In order to support non-English characters, the FTP specifications were extended in 1999 in RFC 2640. This extension requires the use of UTF-8 as the character set. This character set is a strict superset of ASCII, every valid ASCII character is also the same character in UTF-8.

How do I connect to an FTP server with an IP address and port?

How to connect/access FTP by using Windows Explorer.

1. Open Windows Explorer.
2. Right click on a blank area and choose Add network location.
3. Click Next twice and at the following screen type the IP Address and the port number of your FTP Server.
4. Uncheck the Log on anonymously checkbox and then type your FTP User name.

How do I connect to an FTP port?

Connecting to an FTP server. Use the open command to connect to an FTP server. The syntax for this is open ftp.server.com port where ftp.server.com is the server you want to connect to. Only specify a port if you are connecting to a server that uses a non-default port(the default is 21).

How configure static IP FTP server?

Setting up a static IP address

1. Open Control Panel.
2. Click on Network and Internet.
3. Click on Network and Sharing Center.
4. In the left pane, click the Change adapter settings option.
5. Right-click the network adapter, and select the Properties option.
6. Select the Internet Protocol Version 4 (TCP/IPv4) option.