How do I find the public IP address of my DVR?

How do I find the public IP address of my DVR?

If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the ‘Setup’ button. Enter the system password and press ‘Enter’. Select ‘System Setup’ and press ‘Enter’.

How can I access my DVR from outside network?

Getting Started

1. Make sure that your Modem is connected to the internet.
2. Connect your modem to the internet port on your router.
3. Connect your DVR to one of the data ports of your router.
4. Connect your DVR to your monitor.

How do I find the IP address of my CCTV?

How to view your IP camera remotely via a web browser

1. Find your camera’s IP address.
2. Open a web browser and type the IP address.
3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
4. After you change the port, you will need to reboot the camera in order to save the changes.

Does DVR have IP address?

DVR IP address: The IP address of your DVR. The default IP address for DVRs and NVRs purchased from CCTV Camera World is 192.168. 1.108. Ports that need to be port forwarded: check within the DVR’s network settings to confirm the values for ports it uses.

How can I access my DVR from my computer?

Web Browser Remote Access Setup Instruction

1. Connect your DVR to your router with a CAT-5 network cable.
2. Connect a monitor to your DVR if you have not already done so and power your DVR up.
3. Access the DVRs menu system using a mouse or the wireless remote control.
4. On the DVR System Menu click the Network Sub-Menu.

How do I access my IP address?

For Android Step 1 On your device access Settings and choose WLAN. Step 2 Choose the Wi-Fi you have connected, then you can see the IP address you get.

How do I find my IP address?

Open the Windows Start menu and right-click ”My Network Places.” Click “Properties” and you’ll see a Network Connections screen. Double-click “Wireless Network Connection,” or “Local Area Connection” for wired connections. Open the Support tab and click “Details.” Your IP address will appear.

How can I remotely access my DVR without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port – By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

How to find your gateway and DVR’s IP address?

Click the setting icon to access the settings menu. Click the Network icon, to access the network information. Once on the network screen, select the DHCP box and click save for the DVR to automatically obtain the IP Address and Gateway IP Address information.

Where do I Find my DVR username and password?

In the main screen when the DVR turns on, right click and select Main Menu. Enter the username and password to access the main menu. Once you are in the main menu, click on the Network icon, to access the network menu. Once it restarts, following the steps above, access the network menu again.

Why is my Hikvision DVR passing out new IP?

It is possible the dhcp was enabled and when the router got rebooted it passed out a new IP on your internal network. Younneed to forward the RTSP and HTTP port as well. Try putting your DVR LAN into DMZ mode and see if that fixes the issue.

What should I do if my DVR is not working?

Try putting your DVR LAN into DMZ mode and see if that fixes the issue. If it does then that’s likely your problem. I would also use a different port for HTTP, something like 65.