How do I reset my SonicWall analyzer password?

How do I reset my SonicWall analyzer password?

There are two ways to contact technical support: 1. Online: Visit mysonicwall.com. Once logged in select Resources & Support | Support | Create Case….Resolution

1. Call TechSupport and provide the GMS serial number.
2. Enter the Password Reset Key and click Submit.
3. The password will be reset to password.

How do I change my SonicWall admin password?

How can I change the administrator password?

1. Click DEVICE.
2. Navigate to FIREWALL | Administration | Firewall Administrator page, underneath Administrator Name & Password field.
3. Click Change Password and a pop up will appear. Old Password : password. New Password :

How do I reset my SonicWall to factory settings?

Open a Web browser on your computer, type “192.168. 168.168” into the URL box and press “Enter.” On the SafeMode Management display, click the boot icon on the “Current Firmware with Factory Default Settings” line. This will reboot the SonicWALL to its factory settings state and you can now reconfigure as needed.

What is the default password for SonicWall?

admin
SonicWall Default IP Address: 192.168. 1.254. Administration Credentials: admin | password.

How do I reset my WNS HYVE password?

Go to https://158.85.210.143/webapp/saml/login.

1. Enter your IBM ID.
2. Click Forgot password?.
3. Enter your IBM ID and click Continue.
4. Enter the answer to your security question.
5. Enter your New password.
6. Verify your New password.
7. Click Submit.

How do I change the password on my SonicWALL tz400?

Change admin password on SonicWall TZ series via CLI

1. SSH into your router’s using admin@router’s ip ([email protected])
2. Get into coniguration mode by typing configure.
3. Get into administration.
4. Change the admin password by typing admin-password .

How do I reset my SonicWall VPN?

Login to SonicWall go to Manage | Updates | Restart. Click Restart . Confirm the restart process.

How do I change the password on my SonicWall tz400?

How do I reset my SonicWall NSa 2400?

Push and hold the reset button for 10 seconds, then navigate to “http://192.168.168.168” in a web browser to reconfigure the appliance.

How do I reset my SonicWall NSa 240?

Use a narrow, straight object, like a straightened paper clip or a toothpick, to press and hold the reset button on the back of the security appliance for five to ten seconds. The reset button is in a small hole next to the console port or next to the power supply, depending on your SonicWALL security appliance model.

How do I reset my SonicWall NSa 220?

Hold down the reset button for 10 seconds. On a TZ the reset button is located next to the power jack. On an NSa the reset button is located on the front. Once the test light on the device becomes solid or begins to blink then the SonicWall is in safe mode.