What is a remote throttle?
Allows Travel models to be operated with a throttle instead of the tiller. Includes integrated display showing information on the status of the battery. Includes 1.5 m and 5 m connection cables between the motor and the throttle. Also serves as replacement part for some Cruise and Ultralight models.
What is a kicker motor for a boat?
Kicker motors, also known as spare outboards, are motors that sit next to a bigger, main outboard and can serve a couple of different purposes. They typically are seen in the 10hp or less range. The simplest use for a kicker is as back up.
Can you troll with a 4 stroke outboard?
You use a four-stroke outboard, either your primary motor or a kicker, for trolling. You usually troll for many uninterrupted hours. This is not a problem limited to Yamaha outboards, and Von Plato says he’s seen it in motors from 9.9-hp kickers to 115-hp models.
What do you use a kicker motor for?
First and foremost, using a kicker motor helps you save on gas. Trolling with a kicker offers great gas to time ratio, which helps save on the gas you would have been using with your main outboard. Along with gas, they help prevent putting unwanted hours on your main outboard.
Why do fishing boats have two motors?
Two motors on fishing boats are there for many reasons, and have a couple of clear advantages. Two motors can improve the way the boat maneuvers, it can also increase the reliability of your boat. If one motor is down you are not stuck out on the water. Having two motors on a boat can also give you more power.
Is a kicker motor worth it?
A kicker motor can get your trolling speed slower than main engines. A kicker motor will burn less gas than your main engine. This is debatable. For starters at idle speed, yes the two cylinder 9.9 motor will burn less than your main power plant does, but that kicker isn’t running at idle when you’re trolling.
What side does a kicker motor go on?
Choose the most appropriate side of the transom. Since the outboard tiller is usually on the port side of the motor, most kickers are mounted on the starboard-side of the transom to facilitate easier tiller steering and throttle control while slow-trolling or putting home.
What is a drift sock?
A drift sock is a large “bag” (think parachute) that attaches to the boat with a harness and a buoy. The action of the drift sock dragging in the water helps to keep the boat straight or moving in the intended direction and also helps to slow the boat down as it’s drifting across the water.
What does the controllking Remote Throttle Control do?
Designed to complement remote steering systems without interfering with your motor’s normal, manual throttle control, the ConTrollKing® Remote Throttle Control allows you to adjust your motor’s speed using either manual controls or the ConTrollKing.
How does the infinitypro remote engine throttle work?
The InfinityPRO series of remote engine throttles use optical technology. There is no potentiometer, electromechanical switch, or mechanical stop. The engine RPM control signal is set at idle when power is applied regardless of the control knob position.
How does the throttle work on a car?
There is no potentiometer, electromechanical switch, or mechanical stop. The engine RPM control signal is set at idle when power is applied regardless of the control knob position. The throttle uses an Infrared Encoder (IRE) to detect the direction and speed of the control knob when it is rotated.
How do you install a remote engine throttle?
Install Remote Throttle 1. Set inner nut and star washer to allow 0.85-inch (approximately one thread) to be exposed after outer nut is tightened. 2. Install InfinityPro plate, install and tighten outer nut. 3. Slide control knob over idle button and onto outer shaft.