How do I reset my Weiser power bolt?

How do I reset my Weiser power bolt?

How to restore default settings on my Powerbolt 2? Perform a factory reset

1. Make sure the door is open and unlocked.
2. Enter the default Mastercode (O-O-O-0).
3. Press the lock button.
4. Press 0.
5. Press the lock button.
6. Test the lock: With the door open and unlocked, Press the lock button.

How do you program a Weiser deadbolt?

Note: Programming instructions can also be found on interior of lock.

1. a. Press the program button on the interior unit once.
2. b. Enter in 4 to 8 digit code onto the keypad.
3. c. Press the “LOCK” button to save code.
4. d.
5. a. Press the program button on the interior unit twice.
6. b.
7. c.
8. d.

What is the master code for Weiser lock?

0-0-0-0
The lock is programmed with the default mastercode 0-0-0-0. Replace this with a code of your own. The mastercode must be 4-10 digits. Keep door open and unlocked during programming.

What is Weiser master code?

The Mastercode will not unlock your door. It is an added security feature that is used to set up all functions. The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. Make sure the lock is unlocked and the door is open.

How long do batteries last in Weiser Lock?

1 year
The batteries will last 1 year. Note: this is based on the motorized deadbolt being cycled ten times a day. Typical battery life is 12-16 months based on use.

How do I change the master code on my Weiser Smart Lock?

Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.

How do you remove a code from a Weiser Lock?

While the door is open, test the user code to make sure it no longer unlocks the door. 2 Press Lock button once. 4 Press Lock button once. 3 Enter user code to be deleted.

How do you remove a code from a Weiser lock?