How do I setup my speedtouch wireless router?

How do I setup my speedtouch wireless router?

Configure as router

1. Plug in (including power and ethernet) and then turn on modem.
2. Click Speedtouch from the menu on the left.
3. Click Setup in the pick a task section at the bottom of the page.
4. Click Next.
5. Select Router from the menu in the Service Selection window.
6. Click Next.

How do I access my iinet modem settings?

Log in with the default username “admin” and default password “admin”, or use your custom login details. Select the Advanced tab and then select Wireless > Wireless Settings from the left-hand menu. By default, you’ll see the settings for the 2.4GHz WiFi network.

How to reset your modem?

Steps to Reboot a Router and Modem

1. Unplug the router and the modem.
2. Wait at least 30 seconds.
3. Plug in the modem.
4. Wait at least 60 seconds.
5. Plug in the router.
6. Wait at least 2 minutes.
7. When the router and modem restart, test to see if the problem went away.

What is speedtouch modem?

SpeedTouch Home. A modem which provides bridged and PPTP connections for Internet connectivity. The modem uses an Ethernet cable to connect to a PC, or may be connected to a router that supports PPPoE.

What is the IP for iiNet router?

Type http://192.168.1.1 into the address box, and then press Enter. 2. Log in to the Home Gateway’s Settings page with these default details: Username: admin Password: admin 3.

How do I log into my iiNet router?

iNet router? First, type the router’s IP address in your browser’s address bar, Then, enter your router username and password, and then click OK or LOGIN. Above, you can find the most probable default credentials.

How do I restore my Internet connection?

Restart your device.

1. Restart your device. It might sound simple, but sometimes that’s all it takes to fix a bad connection.
2. If restarting doesn’t work, switch between Wi-Fi and mobile data: Open your Settings app “Wireless & networks” or “Connections”.
3. Try the troubleshooting steps below.

How do I hard reset my router?

How to Reset a Router

1. Keep your router plugged in.
2. Find your router’s reset button. This will be on the back or the bottom of your router.
3. Use a paperclip to hold down the reset button for 30 seconds.
4. Release the button.
5. Wait for the router to power back on.

What is speedtouch?

Under the SpeedTouch name Alcatel and Technicolor retail a variety of equipment including ADSL and ADSL2+ modems, residential gateways, wireless access equipment, VoIP handsets and SHDSL interconnect equipment. They are a major brand in home and business networking products.

How do I access my iiNet router?

Open a web browser on your computer and go to http://192.168.1.1. 3. Log in with the default username “admin” and password “admin”. If you have changed your password, please use your custom password instead.

What is the default password for a iiNet router?

admin
For modems purchased from iiNet, the default username and password are both typically “admin”.

How to setup dsldevice.lan for SpeedTouch?

Open a web browser and type http://dsldevice.lan or http://192.168.1.254 in to the address bar. Press Enter. (For details, see Modem Web Interface .) Click Setup in the pick a task section at the bottom of the page. This will cause a popup to come up on your screen saying welcome to easy setup

How do I set up SpeedTouch on my router?

Telnet to the router At the Command Prompt, type in: telnet speedtouch.lan and press enter. This is the gateway of your router. Alternatively, you can also use ‘dsldevice.lan’ or the gateway IP address

Where do I enter SpeedTouch gateway IP address?

At the Command Prompt, type in: telnet speedtouch.lan and press enter. This is the gateway of your router. Alternatively, you can also use ‘dsldevice.lan’ or the gateway IP address 3.

How to disable wireless access point in SpeedTouch?

Open web browser and type http://dsldevice.lan in to the address bar. Press Enter. Click on Wlan: Speedtouch… Wireless Access Point menu will appear. At the top right, click Configure In the Configuration section, remove the checkmark beside Interface Enabled to disable wireless, or add the checkmark to enable it