What material is zero clearance insert?
Sheet material made from phenolic resin is the current material of choice for woodworking jigs and fixtures of all sorts, and is the perfect material for a zero clearance insert. It lays flat, provides rigid support and wears like iron, but still can be machined using the tool you already have in your shop.
What is a zero clearance blade insert?
In simple terms, the zero clearance insert is one of the most important accessories you can buy for your tablesaw. It closes the gap from the metal insert that came with your saw which reduces the possibility of tear-out on your cuts.
When should you not use zero clearance insert?
Limitations When Using Zero Clearance Inserts Once a ZCI is made for a straight-on 90° cut, it can’t be used on other cuts. If you need to make a 45° bevel cut, you can’t use your 90° ZCI. You must have a 45° ZCI, or swap in the throat insert.
What is a zero clearance insert for miter saw?
What is a Zero Clearance Insert? A zero clearance insert replaces our stock miter saw throat plate. The insert reduces the gap between the edges of the insert and the blade. This provides support for our board and reduces the chances for tear-out.
Can I use dado without a throat plate?
Making inserts is easy, and if you are using any kind of a dado blade or cutting widths, you need to have throat plate that is at least close to the width you are cutting, it doesn’t necessarily need to be a perfect fit, but it should be close in order to be a safety benefit …
Can I put a dado blade on a table saw?
As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.
What is a zero clearance throat plate used for?
A zero clearance insert (ZCI) is a one of the most beneficial accessories you can use with a table saw. It’s a replacement for the throat plate that comes with your table saw. The purpose of a zero clearance insert is to bring the distance between the saw blade and the nearest supporting surface down to zero.