How do I reset a Cisco switch to factory settings?

How do I reset a Cisco switch to factory settings?

Resetting the Cisco IP switch to factory defaults

1. Reset the switch to factory defaults: Erase the existing configuration: write erase. Reload the switch software: reload.
2. Save the configuration: IP_switch-A-1# copy running-config startup-config.
3. Reboot the switch and wait for the switch to reload: IP_switch-A-1# reload.

How do I restore a Cisco switch to factory settings?

How do I reset a Cisco switch to factory default?

How do you clear a switch configuration?

Clear the configuration of your switch

1. Log on to your switch, and enter the privileged EXEC mode by entering enable and then entering the enable password command.
2. Enter write erase, which erases the NVRAM file system and removes all files.
3. At the prompt, confirm that you want to erase all files.

How do you set up a Catalyst 2960 switch?

How to Configure Cisco 2960 Switches Step by Step?

1. Connect the hosts to the switch and configure them.
2. Connect the router to the switch and configure the router.
3. Configure the switch.
4. Configure the management interface on VLAN 1.
5. Verify the configuration of the switch.
6. Verify connectivity using ping and Telnet.

How do I remove a configuration from a Cisco switch?

Clear the configuration of your Switch

1. Log on to your switch, and enter the privileged EXEC mode by entering enable and then entering the enable password command.
2. Enter write erase, which erases the NVRAM file system and removes all files.
3. At the prompt, confirm that you want to erase all files.

How do you reset your Cisco password?

Reset Cisco router to default password. If you decide to revert your Cisco router to it’s factory defaults, you should do the 30-30-30 reset as follows: When your Cisco router is powered on, press and hold the reset button for 30 seconds.

How do you reboot a Cisco switch?

Log in to the web console and choose Administration > Reboot. Click the radio button to reboot the switch at the desired time. Check the Restore to Factory Defaults check box to reboot the switch to the factory default configuration. Click Reboot to reboot the switch.

How do you Access Cisco router?

To access Cisco router with CCP following steps are required. Connect to your router using console and configure it for Telnet and SSH. Configure SSH and Telnet for local login and privilege level 15. Enable the router’s HTTP or HTTPS server. Create a user with privilege level 15. Discover the router with CCP.