How do I change the fan speed on my fan?

How do I change the fan speed on my fan?

How to Use SpeedFan?

1. Step 1 – Download SpeedFan And Get Familiar.
2. Step 2 – Configure the Options Tab.
3. Step 3 :- Select your chip For Testing Your Fan Controls.
4. Step 4 :- Check Fan speed.
5. Step 5 :- Set the automatic fan speed (Alternative way)
6. Step 6:- Control fan speed based on the temperature.

How do I control fan speed on Linux laptop?

The procedure to find fan speed on Linux is as follows:

1. First, install lm-sensors package using package manager.
2. Configure sensors by running sudo sensors-detect command.
3. Save the configuration file.
4. Finally, run sensors command in Linux to see CPU and GPU temperature, including fan speed.

How do I change my fan speed in Ubuntu?

Configure fancontrol

1. In terminal type sudo pwmconfig .
2. You will have to specify what sensors to use.
3. Run through the prompts and save the changes to the default location.
4. Make adjustments to fine-tune /etc/fancontrol and use sudo service fancontrol restart to apply your changes.

How do I change my fan speed in BIOS?

HP Desktop PC – Setting the Minimum Fan Speed in BIOS

1. Turn on the computer, and then immediately press F10 to enter BIOS.
2. Under the Power tab, select Thermal. Figure : Select Thermal.
3. Use the left and right arrows to set the fans minimum speed, and then press F10 to accept the changes. Figure : Set the fans minimum speed.

How do I manually control CPU fan speed?

Use the arrow keys on your keyboard to scroll through the BIOS menu to the “Monitor,” “Status” or other similarly named submenu (this will also vary slightly by manufacturer). Select the “Fan Speed Control” option from the submenu to open the fan controls.

How do I control the fan speed on my laptop Ubuntu?

Ubuntu – How to control fan speed

1. Install the lm-sensors and fancontrol packages.
2. Configure lm-sensors as follows: In terminal type sudo sensors-detect and answer YES to all YES/no questions.
3. Configure fancontrol. In terminal type sudo pwmconfig .
4. Set up fancontrol service. Run sudo service fancontrol start .

How do I configure Thinkfan?

Thinkfan setup

1. Install necessary programs. Install lm-sensors and thinkfan .
2. Setup configuration. Find the temperature control devices with find /sys/devices -type f -name “temp*_input”
3. Enable fan control.
4. Testing and running.
5. Running on startup.

How do I adjust the fan speed on my Dell laptop?

hold down (fn+shift) then type (while still holding down fn+shift) 1,5,3,2,4 – This will enable the special mode. After that fn+R will bring you to a text based screen (again, even in Windows) where you can get to all the temps, fan speeds, etc, and even set the throttling percentages……