Can a boat transom be repaired?
While it is a pretty complicated job, replacing the transom core isn’t impossible. Transoms are usually replaced from inside the boat. This means removing all the internal structure, seats, and tanks, etc. so you can work on the transom.
How do you fix a broken transom?
Fill the crack with Terhi Fix and reinforce with a strip of fibreglass mat or glue a plate of ABS-plastic over the whole damaged area. Use screws (which can be removed when the Fix is dry) to mount the plate. Fill the holes and even the edges. Let dry.
What happens if transom is rotten?
Bad rot will lead to totally deteriorated wood and a lot of flex in the transom when the outdrive unit is under load. If you’re not experiencing that, then your transom overall is probably okay. You can probe with a piece of stiff wire around the screw holes and see if there is any severe softness.
Can you reinforce a transom?
Apply epoxy to the edges of the outer fiberglass skin of the transom and over the heads of the screws holding the skin to the plywood, and lay a strip of fiberglass cloth over the epoxy. Once the fiberglass has cured, repeat this step until four layers of fiberglass and epoxy have been applied.
How do I know if my boat transom is bad?
Typically you will see the transom flexing under power, or flexing when applying pressure to the outboard (by hand). You may also see large stress cracks in the corners where the transom meets the sidewalls. For fiberglass you could take a core sample using a hole saw to see if the inner wood is wet and/or rotted.
How do you reinforce a transom?
How long do transoms last?
I have found the floor and transom to last roughly 10 years. Less if you don’t cover it or fish in monsoons. The problem is the manufacturers use cdx plywood on the transom and not marine plywood. If you replace it use 3 sheets of marine grade, screw them together and seal it with West systems epoxy.
How much does transom repair cost?
Repairing a transom is a laborious exercise that can range from $3,000 to $10,000 depending on the vessel size construction and tradesmen used for the task. There are many techniques in placing a transom.
How much does it cost to fix a rotten transom?
In boat repair circles it is a job for a professional yard — tear the old transom away and replace it. This is usually estimated at a cost somewhere between $2,000.00 and $5,000.00 or more depending on the size of the boat.
How much does it cost to have a transom replace?
How much to fix a wet transom. Repairing a transom is a laborious exercise that can range from $3,000 to $10,000 depending on the vessel size construction and tradesmen used for the task.
How do you strengthen a boat transom?
Rough up the edges of the outer fiberglass skin you removed from the transom with the palm sander. Apply a heavy coat of epoxy to the last sheet of plywood you used to fill the transom void, and replace the outer fiberglass skin of the transom, using wood screws around the edges to attach the fiberglass to the plywood.