How do I turn off the message light on my Uniden phone?

How do I turn off the message light on my Uniden phone?

Solution: Press and hold the Page button on the base for 5-10 seconds (the instructions said 5 seconds, but it seemed to take longer). The handset will start beeping and then will have a long beep. After the long beep, the handset is reset and the voice mail indicator is extinguished.

How can I make my Uniden DECT 6.0 Ring longer?

Press Menu/Select. Select the Ans. Setup menu, and then the Ring Time submenu. Move the cursor to select a ring time (Toll Saver, 2 Times, 4 Times, or 6 Times).

What does the red light at the top of my phone mean?

Yes, it is a proximity sensor. If your iPhone is unlocked and you hold the phone up to your ear, you will find that Siri comes on – this is triggered by that proximity sensor.

How do I reset my voicemail on my Uniden phone?

From the base:

1. Press Menu and select Ans. Setup.
2. Select Line 1 or Line 2, then select Record Greeting.
3. Press Start. Wait for the system to say “Record greeting”, then begin your recording.
4. When you’re finished, press Stop. The system plays back your new greeting.
5. To keep this greeting, press Stop again.

How do I change the message on my Uniden answering machine?

How do I reset my Uniden phone answering machine?

A: We suggest the following handset reset procedure.

1. Disconnect the Battery.
2. Press and Hold the Star and Pound key.
3. Reconnect the battery while holding down both keys.
4. Wait for the long beep.
5. De-register and Re-register the handset, if this doesn’t resolve the issue.
6. Clear the memory of the handset.

How do you change the number of rings before voicemail?

The code should be entered in this format: **61*voicemailphonenumber**seconds# . Replace “voicemailphonenumber” with the phone number you wrote down in the previous step, and “seconds” with 5, 10, 15, 20, 25, or 30 to indicate how many seconds should pass before the call is sent to voicemail.

How do I increase the number of rings on my Uniden phone?

How do I extend the number of rings? Press the answer button on the base (answer off), this will give you up to 15 rings before the answering machine turns on and takes the message.

How do I reset my DECT 6.0 phone?

To reset: pick up the handset and press the PHONE/FLASH button, then press the OFF/CLEAR button and place the handset back into the telephone base. You may also reset by unplugging the power from the telephone base and plugging it back in.

How to change the message on Uniden answering machine?

How to Change the Message on a Uniden Answering Machine 1 Press the MESSAGE/MUTE to access the answering system. 2 Press 8 once the machine is done making its announcements. 3 Wait for the system to say, “Record greeting”. 4 Record your greeting. 5 Press 8 again to stop recording. See More….

What does flashing red light mean on Uniden phone?

Our Uniden DECT 6.0 cordless phone has a flashing red light Our Uniden DECT 6.0 cordless phone has a flashing red light that usually means a message is waiting. It also has an envelope symbol at the center top of the window. There are only 2 messages that have…

How do you mute outgoing messages on Uniden?

Press the “envelope” button that says mute underneath it at the bottom of the handset keypad. It will start playing your messages. Press 5 to skip/pause this, then press 8 and wait for instructions to record.