Does HP still make ProCurve switches?

Does HP still make ProCurve switches?

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking in September 2010.

How do I turn off HP ProCurve switch?

The most graceful way to shutdown an E-series Procurve switch is to do a “write memory” command at the CLI, (alternately exiting the menu interface or committing a change on the WebUI), wait for the command to complete, then pull the plug. If you want to reboot, you can do a “reload” or a “boot” command.

How do I update my HP ProCurve switch?

To update the firmware:

1. Log into your HP switch web console.
2. Go to Maintenance > Update Manager.
3. For update method, select HTTP.
4. Click Browse to select the designated file.
5. Leave Server IP and File Name fields blank.
6. For Update Type, select Code.
7. In the Image field, choose Active.
8. Click Download.

What happened to HP ProCurve switches?

The HP 2920 series (1G stackable PoE layer 2 switches) are now branded as “Aruba 2920”. Most of the same part numbers apply. Aruba 2920 quickspecs. The 3800 series (1G stackable PoE layer 3 switches) are now branded as “Aruba 3810M”.

What happened HP ProCurve?

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking in September 2010 after HP bought 3Com Corporation.

How do I enable interface on HP switch?

To configure the management Ethernet interface follow the steps given below:

1. Enter system view and use the command.
2. Enter management Ethernet interface view and use the command.
3. Change the description of the interface and use the command.
4. Shut down the interface and use the command.

How do I check my ports on my HP switch?

To check the mode setting for a port on the switch, use either the Port Status screen in the menu interface or show interfaces brief in the CLI (see Viewing port status and configuration (CLI)).

How do I setup my HP POE switch?

Manually configuring PoE power levels

1. Set the PoE allocation by entering the poe-allocate-by value command: HP Switch(config) # int A6 poe-allocate-by value. or in interface context: HP Switch(eth-A6) # poe-allocate-by value.
2. Select a value: HP Switch(config) # int A6 poe-value 15. or in interface context:

How do I assign an IP address to my HP ProCurve Switch?

HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.

How do I download firmware on my HP switch?

How to: How to Update HP Switch Firmware

1. Step 1: Search for your switch on HP’s Networking Lookup Tool.
2. Step 2: Next, click on “Software downloads”
3. Step 3: Select the most recent version and download the firmware.
4. Step 4: Copy the .swi file from the downloaded firmware folder to your root TFTP folder.

How do I upgrade my Aruba switch?

Automatically upgrading firmware on a device

1. Go to Maintenance, Firmware.
2. Select the devices to upgrade.
3. Click Upgrade Firmware, select Automatic.
4. Specify if the upgrade must be carried out immediately or at a later date and time.
5. Click Upgrade.
6. If the upgrade fails, retry upgrading user’s device.