How do I study for a CDL pre-trip?

How do I study for a CDL pre-trip?

Steps in Studying for a CDL Pre-Trip Inspection

1. Make sure kingpins, ball joints, and shocks look good and have lubrication.
2. Check fluid levels including windshield washer fluid, coolant, and oil.
3. Look at steering axle tires for uneven wear.
4. Look for fluid drips or leaks in and around the engine.

What is the meaning of pre trip?

: before travel : occurring or existing prior to travelling pretravel planning a pretravel medical consultation.

How do you memorize a CDL pre trip inspection?

The only way to memorize the pre-trip is to repeat it over and over. Start with the engine area and work your way around the truck and finally inside the cab. There is no way around consistent repetition. The more you do it the more you will memorize it.

How long does a dot pre trip have to be?

approximately 30 to 50 minutes
It is the driver’s responsibility to ensure the vehicle is safe for operation and is free from defects. Currently, there are no guidelines as to how long a pre-trip inspection should take. If you check everything you should be checking, a full inspection should take you approximately 30 to 50 minutes.

What do you look for when you check the air and electric lines?

Air/Electric Lines Check that air hoses and electrical lines are not cut, chafed, spliced, or worn (steel braid should not show through). Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.

How hard is CDL pre-trip?

Learning the vehicle inspection portion of the CDL test is difficult for many students. Passing the test requires each student to study and memorize the items tested. Drivers need to be able to point out a part, and describe what condition it is in.

How do I memorize a pre-trip inspection?

What is the 11 hour limit?

2. What is the 11-hour rule? The 11-hour rule states that within the 14-hour window, a property-carrying driver can drive a maximum of 11 hours after 10 consecutive hours off duty. Passenger-carrying drivers can drive up to 10 hours after eight consecutive hours off duty.

What is a CDL road test?

CDL On-Road Driving Test. The road test is conducted on street and requires the driver to demonstrate skill in normal traffic situations such as: turns; intersections; lane changes; stop/start; etc. The road test is described in Section 13 of the Free CDL Handbook (Commercial Driver’s License Manual).

Can drive with CDL permit?

The holder of a Commercial Driver’s License permit can drive any motor vehicle on a highway as long as they have someone with a CDL with them who is licensed for the type of vehicle they are driving. This individual must be sitting directly beside the permit holder.

What is CDL Manual?

The CDL Manual, also known as the CDL Handbook, is the training manual you will study in order to pass the written test to obtain your commercial learner’s permit. The commercial learner’s permit allows you to drive a tractor trailer as long as you have a licensed CDL holder in the vehicle with you.

What is a CDL check?

CDL check – provides employers with the ability to run instant driver record checks and driver monitoring in all 50 states. We are one of the leading online commercial driver background screeners in the country.