How do you winterize a Kawasaki jet ski?

How do you winterize a Kawasaki jet ski?

Winterize the Jet Ski Engine

1. Tilt the jet ski up slightly and turn the handles side to side.
2. In 20-second increments, run the engine and pull the throttle once or twice to remove excess water.
3. When water is no longer visible, remove the air filter and spray fogging oil into the carburetor.

Is it bad to not winterize a jet ski?

If You Don’t Winterize Your Boat, Here’s What Happens: Water freezes and expands and can damage anything it’s trapped inside. Water may seep into unprotected spaces to do this. Acidic and corrosive wastes, salt and corrosion buildup can damage delicate parts in engines. Fuels break down or grow dirty.

What temperature should you winterize your jet ski?

Do You Need To Winterize Your Jet Ski? If you live somewhere that has temperatures that get below (40F/5C) you need to winterize your jet ski. If you don’t winterize your jet ski, the water inside the engine, exhaust, and intercooler can expand and crack the metal housing.

How much antifreeze Do I need to winterize my jet ski?

Do not use regular automotive antifreeze. The antifreeze will prevent any fluids from freezing in the exhaust system while the jet ski is stored. Mix one gallon (3.8 L) of RV antifreeze and one gallon (3.8 L) of water in a five gallon (18.9 L) bucket. Flush the mixture through the exhaust system.

How do you winterize a jet ski that doesn’t run?

To winterize a jet ski that won’t start, first remove the spark plugs and spray fogging oil. Next use gravity to force RV antifreeze into the cooling system. After that, spray fogging oil in the carburetor and move the PTO driveshaft. After this is complete, replace the spark plugs and you have a winterized ski.

Do you need to put antifreeze in jet ski?

To prevent engine damage, you need to use antifreeze to flush your cooling system once the season is over. The antifreeze will keep any fluids in the exhaust system from freezing while your jet ski is being stored for the winter. Mix 1 gal. (3.8 L) of RV antifreeze with 1 gal.

How do you flush a Kawasaki jet ski?

The flush port is normally located at the front of the watercraft under the hood. Start the jet ski and then turn on the water to a low setting. Run the jet ski’s engine for a couple of minutes while the hose is connected to the flush port. Turn the accelerator a few times during this process to help flush the engine.

What happens if you don’t flush your jet ski?

Flushing is a simple operation but it is critical that you follow the flushing instructions for your PWC exactly as they are spelled out in the manual. Failure to follow the instructions could result in water getting into the engine, which can lead to expensive repairs.

How much does it cost to winterize a jet ski?

It is going to cost about $700 to have your jet ski winterized. The price will change depending on where you live and the services you are requesting. This is an average price you will pay, and of course, there will be other factors which could play into the price.

What’s the best way to winterize a jet ski?

Winterize your jet ski by draining it, cleaning it, filling it with gas, lubricating it, and storing it correctly. Remove your jet ski from the water. When you’re done with the last ride of the season, get your jet ski out of the water as soon as possible.

Do you have to flush a jet ski with antifreeze?

It is extremely important that you thoroughly flush your systems with antifreeze. Do not skip this step! Even though you’ve completely drained the water out of your jet ski, there may be some water remaining in the systems. When water temperatures drop to freezing, it will turn to ice and expand.

Why do you put gas stabilizer in jet ski?

Fuel stabilizers help prevent residue build-up. A fuel stabilizer is also a great way to protect the jet ski carburetor from contamination while it’s in storage. Following the fuel stabilizer, fill the tank with premium gas to protect the gas tank from condensation.

When to change the oil on a jet ski?

It’s because during the year, contamination and water may accumulate in the engine oil, which can cause damage or malfunctions. That’s why it’s recommended to change the oil at the end of the season. The best practice is to winterize the jet ski and change the engine oil at the same time!