How do I enable AutoSupport on NetApp?

How do I enable AutoSupport on NetApp?

If you want technical support to receive AutoSupport messages, set the following parameters of the system node autosupport modify command:

1. Set -support to enable.
2. Select a transport protocol for messages to NetApp technical support by setting -transport to smtp, http, or https.

How do you trigger AutoSupport on NetApp cluster mode?

This task must be performed on each MetroCluster site.

1. Log in to the cluster at Site_A.
2. Invoke an AutoSupport message indicating the start of the maintenance: system node autosupport invoke -node * -type all -message MAINT=maintenance-window-in-hours.
3. Repeat this step on the partner site.

How do I turn off AutoSupport on Netapp?

Procedure

1. Click Hardware and Diagnostics > AutoSupport.
2. Select the node, and then click Enable or Disable.
3. Click OK.
4. Verify that the AutoSupport status correctly displays the change you made.

How do I download netapp AutoSupport?

Steps

1. Sign in to the Deploy utility web user interface using the administrator account.
2. Click the Administration tab at the top of the page.
3. Click AutoSupport and then click Generate.
4. Select the type and provide a description for the package; you can optionally provide a case.
5. Click Generate AutoSupport.

How do I get AutoSupport logs on Netapp?

Procedure

1. Click Hardware and Diagnostics > AutoSupport.
2. Select the node, and then click AutoSupport Request > Generate AutoSupport . By default, the AutoSupport data is generated for all nodes.
3. In the Generate AutoSupport dialog box, perform the following steps:
4. Click Generate.
5. In the Confirmation dialog box, click OK.

How do I find my SMTP server for Netapp?

From the Email menu, select Server. IP address of the SMTP mail server. You can enter a host name rather than an IP address if you have previously configured DNS settings on the Admin Node. Port number to access the SMTP mail server.

How do you collect AutoSupport?

What is the autosupport option in NetApp mail?

AutoSupport options. When such a message is sent to NetApp, the mail handler sends an automated response to the configured recipient addresses using the autosupport.to option, indicating that the test AutoSupport message was received successfully.

What happens when there are too many autosupport messages?

Drops additional messages when too many AutoSupport messages of the same type are sent in too short a time. The default is on. Defines the list of recipients who receive key AutoSupport messages, as defined in factory-default settings.

Is there a way to enable or disable autosupport?

Enables and disables AutoSupport notification. The default is on. The default is Postmaster@xxx, where xxx is the name of the system. Enables and disables local storage of AutoSupport files when sending of AutoSupport messages is disabled.

How many email addresses are allowed in autosupport?

You can use the autosupport trigger show command to display AutoSupport trigger configuration and the autosupport trigger modify command to modify the trigger configuration. Up to five email addresses are allowed, or the list can be left empty.