What is the default IP of Linksys WAP54G?
192.168.1.245
The default IP address of a WAP54G is 192.168. 1.245 and the Configuration Type is Static IP.
How do I Reset my Linksys access point WAP54G?
How to Reset a WAP54G Password
- Take a small paperclip and bend one end of it so that it’s straight.
- Locate the reset button on the back of the router.
- Release the button and wait until the lights stop blinking while the access point resets itself.
How do I access Linksys WAP54G?
Connect to a Router
- Connect the Linksys WAP54G device to your Internet modem using the Ethernet cable.
- Open a Web browser and type “http://192.168.1.245” — without quotation marks — in the address bar.
- Type “admin” — without quotation marks — in the password field.
How do I find my Linksys access point default IP?
To access the web-based utility of the Access Point, launch your web browser. In the Address field, enter the Access Point’s default IP address, 192.168. 1.245, or the IP address you entered during the Setup Wizard.
How do I restore my access point configuration to its factory default settings?
Press and hold the Reset button of your access point for 30 seconds. Once the access point is reset, perform a powercycle….
- Open the access point’s web-based setup page. For instructions, click here.
- Click the Administration tab and then click on the Factory Defaults sub-tab.
- Click Restore All Settings.
What is the default IP Address for Linksys WAP300N?
10.100.1.1
Access the Linksys WAP300N’s web-based setup page by opening a web browser and entering its IP Address on the Address bar. NOTE: The default IP Address of the Linksys WAP300N is 10.100. 1.1.
What is the default IP address for Linksys WAP300N?
How do I log into my Linksys access point?
Open a web browser, type 192.168. 1.252 in the Address bar and press [Enter]. Step 4: On the authentication window that will appear, enter the default username and password “admin” in both the Username and Password fields then click Log in.