What does E20 mean on my AEG washing machine?
AEG error E20, E21, E22, E23, E24, E25, E32, C2, or F2. Your AEG washing machine doesn’t drain the water. The drum may be full of water. This can be due to a clogged drain filter or another problem with the drain. Otherwise the washing machine must pump up the water too far.
How to drain aeg lavamat?
Turn off the appliance. Open the door to the fluff filter and place the drip tray underneath. Empty any water out of the machine by opening the drain hose next to the filter. Remove the filter by turning it anti-clockwise (several times firmly by hand).
How to reset aeg lavamat washing machine?
To reset this you need to turn the dial to off. Press and hold the start button and the button to the left of it. Keep them held in and turn the dial 1 click clockwise. Once the screen starts to flash let go of the buttons.
What does E40 mean on a AEG washing machine?
AEG Washing Machine Error Codes
| Error Code | Fault Description |
|---|---|
| E40 | The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty. |
| E41 | The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty. |
How do I know if my washing machine pump is clogged?
Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose, says Family Handyman. If you don’t see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.
How do I reset the code on my AEG washing machine?
You have to run the “test” cycle. With the switch in the off position, hold in the Pre wash & soak button and then turn the rotary knob to gentle (or short) spin. Presumably this should run a short test sequence and clear the error.
How do I fix E40 error on washing machine?
Resolution:
- Check if the door / lid is properly closed. If necessary, give the door / lid a firm push.
- Check whether any laundry is caught between the door seal and door glass.
- There is too much laundry in the machine (overload).
- Check the mechanical child safety lock (if applicable).
- Contact authorized Service Centre.
Where did the idea of AEG come from?
AEG was founded in Germany over a century ago on a simple philosophy: everything it designs should be perfect in both form and function.
Why do I get an E20 error code?
Ok E20 is a draining error code. What you need to do is take the filter out again but this time with the filter out look inside the pump chamber and at the back you will see the impeller X shape. Make sure theres nothing jammed up in there stopping the impeller from turning.
What does AEG stand for in military terms?
Acronym Definition AEG Airsoft Electric Gun AEG Air Expeditionary Group AEG Automatic Electric Gun (airsoft) AEG Anschutz Entertainment Group (Los Angele
Why is my AEG Electrolux not draining water?
It means that the machine is not draining water correctly. Check the drain hose, to see if it is kinked or folded over. It could also be that the drain pump or drain hose are clogged.