How can I configure BSNL ADSL modem with WIFI router?

How can I configure BSNL ADSL modem with WIFI router?

Modem configuration:

1. In the Internet Explorer, type 192.168.1.1 and press enter.
2. Type username as admin and password as admin and press OK.
3. Click “Advanced Setup”
4. Click Edit button against VPI/VCI -0 and 35.
5. Click Next in the above screen.
6. Select PPP over Ethernet (PPPoE) in the above screen.

How do I adjust my modem settings?

Using any device with a browser, connect to the WiFi network of your modem. Open the browser, and enter the gateway address written on the back of the modem (this is commonly a string of numbers, such as 00.13. 11.189). Then enter your modem username and password, which should also be on the modem.

What are ADSL settings?

ADSL SETTINGS

• Encapsulation: PPPoA (PPP over ATM).
• Multiplexing: VC-MUX or VC-Based.
• VPI: 0.
• VCI: 38.
• Modulation: Multimode or automatic. However.
• IP Address: Obtain automatically or dynamic.
• MTU: This should be left on the router default unless addressing a specific problem.

What do I need for ADSL connection?

What hardware is needed for ADSL?

1. Set-up and equipment. Regardless of your current set-up, Southern Communications will provide you with everything required for ADSL, or ADSL2 when you choose to have it installed.
2. A DSL Broadband Modem or Router.
3. Modem.
4. Router.
5. Microfilters.
6. Additional equipment.

Can we use D-Link router for BSNL broadband?

D-Link DSL-2750U Wireless-N 300 ADSL2/2+ 4-Port Router , RJ-11 Internet port. (Works with Telephone Line of BSNL & MTNL)

How do I configure my modem?

Power on your router and computer first and then modem.

1. Log into the router’s web-based management page.
2. Configure WAN Connection Type.
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I convert ADSL to DSL?

How to setup the ADSL router in DSL mode

1. Take an Ethernet cable to connect your computer with one of the yellow LAN ports (1, 2, 3 or 4) of the router.
2. Check the LED lights.
3. Note:If you can access internet through W150D/W300D after setting,the DSL light should be always on.
4. Open a web browser (IE, Firefox, Safari, etc.)

Can I use ADSL router as normal router?

A modem router can work as modem and router at the same time—converting the DSL line to an Ethernet connection and sharing the wireless network directly. You can perform both functions with only one device instead of a modem connected to your WiFi router.

How do I set up a broadband connection with BSNL?

Simply follow these instruction: On Windows7/Vista go to Control Panel > Network and Sharing Center > Set up a New connection or Network. Select the first option, i.e, Setup a Wireless, Broadband or Dial-up and hit “Next”. Select the Broadband PPPoE and enter your username, password provided to you by BSNL.

How to set PVC name in BSNL modem?

By default, login details for BSNL modem is the same for all users. Username & Password are set to admin. In the left pane, click on Internet Connection under Configuration Tab. Once done, click on Add button as below. Use PVC Name as per your choice. VCI should be set to 35. Once set, click on Next

Do you need a CD for a BSNL modem?

For this setup, BSNL modem comes with a CD, which frankly speaking, is the worst manual I have ever seen. We have to wait for almost a week for the BSNL guys to come at our home and do the necessary configuration.

Why is my BSNL modem red in India?

[Important Notice: Out of the topic though. Recently, all over India BSNL got attacked with malware, due to this many broadband users across the country have faced internet issue (most commonly a RED Led glowing on their modem). I have written a post on how to restore a malware affected BSNL modem and how to avoid such situation.