Which transistor can be used in place of 2N3904?

The complementary PNP transistor is 2N3906.

Can I use 2N2222 instead of 2N3904?

In simple terms, this effectively means that 40V is the maximum amount of voltage that the transistor can handle minus the voltage drop across the load connected to the collector. since the 2N3904 and 2N2222 have the same maximum VCEO voltage, there is no difference in this regard.

What is the difference between 2N3904 and 2N3906?

camere. As people said that the basic difference between 2N3904 and 2N3906 is that former is NPN transistor and later is PNP.

What is S8550 transistor?

S8550 is a PNP transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. When base current is removed the transistor becomes fully off, this stage is called as the Cut-off Region.

Can we use BC547 instead of BC548?

This group of NPN transistors share many specifications and characteristic curves, but differ in voltage ratings – the BC546 and BC547 are essentially the same as the BC548 but selected with higher breakdown voltages, while the BC549 is a low noise version, and the BC550 is both high-voltage and low-noise.

Which transistor can be used in place of 2n2222a?

The 2N2907 is an equally popular PNP transistor complementary to the 2N2222. The 2N3904 is an NPN transistor that can only switch one-third the current of the 2N2222 but has otherwise similar characteristics.

Can I use BC547 instead of 2N2222?

You can update the circuit at anytime, you can replace the 2n2222 NPN transistors with the BC547 and it will have no negative effect on the project.

Which transistor can be used in place of 2N2222?

Is a 2N3906 NPN or PNP?

The 2N3906 is a commonly used PNP bipolar junction transistor intended for general purpose low-power amplifying or switching applications. It is designed for low electric current and power and medium voltage, and can operate at moderately high speeds.

What is the use of BC547?

BC547 is usually used for current amplifier, quick switching and pulse-width modulation (PWM). Therefore, if you need to control the speed of a motor or actuator in some of your projects, you can simply use this transistor to achieve it.

What is a 2N2222A transistor?

The 2N2222A transistor is a common NPN BJT & it is mainly used in the applications of switching & amplifying with less power. This transistor is mainly designed for low power, low to medium current, medium voltage & works at fairly high speeds.

What is BC557 transistor?

BC557 is a general-purpose transistor, used like an amplifier or a switch in electronic circuits. Its hFE ratings of this transistor range from 125 to 800 to make the transistor ideal by using like an amplifier within electronic circuits like audio signal amplification.

Are there any alternatives to the s8550 transistor?

Alternative transistors for S8550 are BC528, 2N2906, BC527 and S8050, these are only few equivalents if you don’t fine them there are also more alternatives of S8550. Like S8050, its PNP alternative S8550 is also a widely used transistor, it is a reliable low cost transistor with very good technical characteristics.

What is the maximum gain of the s8050 NPN transistor?

S8050 is a NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. It has a maximum gain value of 400; this value determines the amplification capacity of the transistor normally S8050.

Is the s8050 the same as the s8550?

Like S8050, its PNP alternative S8550 is also a widely used transistor, it is a reliable low cost transistor with very good technical characteristics. It is designed for audio amplification and other general requirements in electronic circuits but apart from that it is also used widely in commercial appliances.

When does the s8050 transistor leave the base pin open?