Are Broan fans interchangeable?

Are Broan fans interchangeable?

With this new kit – it is easy to upgrade your Broan, Nutone, or Nautilus fan. Other fan housings cannot be substituted. For use only with Broan fan models 670, 671, 688, 689 and Nautilus fan models N671, N688 and NuTone fan models 693, 695, 696N.

How do I quiet my Broan bathroom fan?

How to Fix a Noisy Bathroom Fan

1. Thoroughly Clean Fan and All Moving Parts.
2. Absorb the Sound With Sorbothane Rubber.
3. Use Larger Duct.
4. Straighten Out the Duct.
5. Adjust the Housing or Fan Blades.
6. Lubricate the Fan Motor and Blades.
7. Tighten the Mounting Screws.
8. Replace the Motor.

How many CFM do I need for my bathroom fan?

For most bathrooms this works out to one CFM per square foot of bathroom area. For example, a 7′ x 10′ bathroom would require a 70 CFM fan. A 50 CFM rating is recommended as a minimum for bathrooms 50 sq. ft.

When did Broan and Nutone merge?

acquired it from Williams plc in 1998 for $242.5 million, adding it to the Broan Group.

Why is my new bathroom fan so loud?

The dirt and dust accumulate over time and can cause the vent to make loud or vibrating noises. Other times it may be that the fan or blower wheel that spins and expels the air out of the bathroom is out of adjustment and hitting the side of the exhaust housing and thus causing the loud sound.

Are Broan fans good?

Broan makes an efficient and affordable bathroom exhaust fan that’s a good pick for homeowners on a budget. The Broan 688 is rated for 50 CFM and is the best fit for small bathrooms of under 50 square feet.

Is 80 CFM enough for a bathroom fan?

In general, choose a fan that can move at least 1 CFM per square foot of room. So, for an 80 square foot bathroom, select an 80 CFM fan. For medium-sized bathrooms, use 80 to 99 CFM bath fans. For large bathrooms that are over 100 square feet but under 150 square feet, use over 100 CFM bath fans.

Is it bad to oversize a bathroom exhaust fan?

Bathroom vent fans are rated for the amount of air they can move, measured in cubic feet per minute, or CFM. First, it’s a good idea to oversize the fan slightly. In our sample 54-square-foot, for example, it’s a good idea to install a 60 CFM fan for good measure.

Can a model 688 Broan fan be replaced?

Thank you for your question on model 688. Unfortunately, there is no direct or suggested replacement for the 690 unit. Any newer unit would require removing the current fan, including the housing, and making the necessary adjustments to your ceiling. Helpful? I am looking for a fan with these same dimensions but WITH a light.

Is there a LED light for the 688 Broan?

Thank you for your question on model 688. Unfortunately, we have no Fan/Light units with 7-1/2″ x 7-1/4″ housing. You can purchase the 688 and the FG600S upgrade kit. This kit would convert the standard grille to a LED light. Helpful?

What does the Broan bathroom exhaust fan cover do?

The Broan® bathroom exhaust fan upgrade grille/cover is a unique lighted ventilation fan grille which allows you to upgrade your existing installed non-lighted ventilation fan or tired incandescent fan/light into a sleek fan/light with bright, efficient LED lighting quickly and easily.

Can a nautilus fan be upgraded to a Broan fan?

For use only with Broan fan models 670, 671, 688, 689 and Nautilus fan models N671, N688 and NuTone fan models 693, 695, 696N. Refer to the table below to double-check that your fan is a candidate for upgrade. Measure the fan housing and compare with dimensions below.