Should you EQ stage monitors?

Should you EQ stage monitors?

In any live sound situation, the graphic equalizer will become one of your best friend as it will help you achieve clarity and as much volume as you can out of your stage monitors. A graphic equalizer has certain frequencies that you can either cut or boost.

How do you set up passive monitors?

To set up a passive monitor, connect the outputs of the mixer to the inputs on the amplifier. Then, connect the outputs of the amp to the monitor’s inputs. While the inputs on a power amp receive a balanced signal, the amp’s outputs send an unbalanced signal.

How do you EQ a stage monitor?

Here’s what he had to say: “One commonly accepted method for EQ’ing monitors is to “ring them out.” Here’s the procedure: Set the gains on all of the mics to be open in the monitors to the same relative level, and then turn the monitor system up until feedback occurs.

What does it mean to ring out the monitors?

Ringing out” the monitors is an expression that describes the technique of locating and adjusting the frequencies most prone to oscillation in the stage environment to achieve the highest possible gain before feedback. In order to get rid of potential feedback you need to force it to happen at the sound check.

How do you EQ stage monitors?

How do you EQ a sound system?

Turn the gain to negative infinity (off), bring the master output fader to unity (0dB), and then set the fader for the microphone channel to +5db. Slowly turn up the sound until there is just a bit of feedback when you say “check.” For a stereo installation, you will want to use the pan to EQ each side separately.

What is a monitor EQ?

The type of EQ most often used in monitor systems is graphic EQ—specifically, 31-band graphic EQ. This type of EQ has 31 boost/cut sliders, each tuned to a specific frequency. When referring to bands, “third-octave” means you have control over three frequency bands per octave.