What are the dimensions of a standard ATX?
305mm x 244mm
A full size ATX board is 12 inches wide by 9.6 inches deep (305mm x 244mm).
What are the dimensions of Mini ATX motherboard?
Mini ATX or Mini-ATX is a generic name used by motherboard manufacturers to describe a small motherboard. A common one is the 15 × 15 cm (5.9 × 5.9 in) size developed by AOpen Inc.. This Mini-ATX definition is slightly smaller than the Mini-ITX 17 × 17 cm (6.7 × 6.7 in) size.
Can Mid Tower fit ATX?
ATX motherboards can fit in most full-size and mid-size towers, but it’s rare to find a small form factor case that can fit a full size ATX board. There are larger cases designed to support the larger Extended ATX standard motherboards which can usually take ATX boards too.
Are PC power supplies standard size?
As for standards, most PSUs come in standard ATX sizes however, some powerful ATX PSUs tend to be longer than some ATX PC cases can support. For example, the Corsair 1200AX is 200mm long and is also an ATX standard PSU.
Do power supplies have different sizes?
Just like hard drives, power supplies come in different shapes and sizes. If you purchase a full size power supply, usually called ATX, or a small form factor called ITX, there may be physical limitations that will prevent you from installing it. Form factors are only a problem because we have different sized cases.
Can micro ATX fit in ATX case?
Backward compatibility. microATX was explicitly designed to be backward-compatible with ATX. The mounting points of microATX motherboards are a subset of those used on full-size ATX boards, and the I/O panel is identical. Thus, microATX motherboards can be used in full-size ATX cases.
Which is bigger mini or micro ATX?
The standard ATX is the largest at 305 by 244 mm. The micro ATX is at second largest at 244 by 244 mm. Finally, the smallest is the mini ITX, which is 170 by 170 mm.
How big is a standard ATX power supply?
Same size as PSU above but with the power inlet on the SHORT side (63x100mm). Often mistaken for the PSU above. – Lower than standard ATX PSU (120mm high instead of 150mm). – Used in some slim ATX desktops too slim to take a standard ATX PSU. – Maximum output available: 350W.
How big is a microATX compared to an ATX?
The standard ATX size is 25% longer, at 12 × 9.6 in (305 × 244 mm). microATX was explicitly designed to be backward-compatible with ATX.
What are the dimensions of an ATX motherboard?
Dimensions of a full-size ATX board are 12 × 9.6 in (305 × 244 mm), which allows many ATX chassis to also accept microATX boards. The official ATX specifications were released by Intel in 1995 and have been revised numerous times since. The most recent ATX motherboard specification is version 2.2.
When did Intel come up with the ATX specification?
According to Wikipedia, ATX is a configuration specification of the motherboard and power supply invented by Intel in 1995. It was the first major change in the motherboard, power supply and desktop computer enclosure design for many years.