What battery is the same as SR927W?

What battery is the same as SR927W?

For example, a size 399 battery is the equivalent of a SR927SW battery, which is also the same is a SG7 Battery.

Is SR927W same as SR927SW?

Because both versions have the same voltage and same physical dimensions, it is perfectly safe to use the high drain version instead of the regular version. Using the regular battery in a high drain watch will however mean that you’ll have to change the battery much earlier.

What battery is equivalent to 927?

395 Battery is a direct replacement for SR926SW, SR57, SR927, SB-AP/DP, 280-48, LA, V395, D395, 610, 395, GP395, S926E, 395, SG7, L926, SW927, 927, 395A, 395X, SB-AP, E395 batteries.

What are 395 batteries used for?

Energizer® 395 Battery For watches, toys, glucose monitors and calculators.

What Energizer battery replaces SR927W?

Energizer 395/399
Energizer 395/399 Silver Oxide 5 Batteries (SR927W / SR927SW)

What’s the most common watch battery?

Silver-oxide
Silver-oxide is the most common type of watch battery that runs on a voltage of 1.55 volts, slightly higher than Alkaline. These batteries are meant to last up to 10 years. Lithium batteries are the highest quality and the most expensive.

What does SR mean on a battery?

Battery Prefixes: BR/CR = Lithium. L = Alkaline. SR = Silver Oxide. LR = Alkaline. SG = Silver Oxide.

What battery replaces SR916SW?

373 Battery is a direct replacement for SR916SW, SR68, SR916, SB-AJ/DJ, 280-45, WA, V373, GP373, 617, 373, D373, 373A, 373X, SB-AJ, E373 batteries.

What is a CR927 battery?

CR927 batteries are non-rechargeable lithium 3.0 volts batteries, featuring good energy density and stable output voltage, making them a preferable choice for many micro and small electronic devices.

What batteries are the same as a 395?

395 Watch Battery SR927SW and equivalent button cell batteries – SR926SW, SR57, SR927, SB-AP, 280-48, V395, D395, 610, GP395, s926E.

What does low drain battery mean?

Answer: If you have the normal current drain for your device, then you can make a general determination by using 600 mA as the low end of high drain devices. Using this method, devices which draw less than 600 mA can be generally considered to be low- to moderate power drain.