Why did my weed wacker stopped working?
When an electric Weed Eater trimmer won’t start, sometimes the most probable cause actually is the cause. Check an electric trimmer to ensure its extension cord is plugged firmly into the machine and plugged firmly into an electrical outlet. A faulty extension cord also may be the problem.
Why does my Weed Eater head not spin?
The reason is that the clutch is bad. Like virtually all line trimmers, Weed Eater trimmers employ a centrifugal clutch that disengages the engine flywheel from the drive shaft when the engine is idling. When the clutch springs wear out, the clutch won’t retract, and the head won’t stop spinning.
How do you tell if weed wacker is flooded?
Tip. Start a warm engine on a Weed Eater without engaging the choke to avoid flooding the carburetor. The telltale sign of a flooded engine is the strong scent of gasoline and no fire from the spark plug.
Why is my Stihl weed eater not starting?
If you’ve used the correct procedure to start your Stihl trimmer and it does not start, the problem is likely related to either the spark, the fuel or the air circulation in the combustion chamber. More often than not, it’s an easy fix, possibly involving replacement of a spark plug or air filter.
Why won’t my gas powered weed wacker start?
First, check the level of fuel in the tank. If it is empty or low, the weed eater will not start. If there is enough fuel and it is fresh, lightly shake and swirl the weed eater to ensure that oil and gasoline are not separated. Many string trimmers require a 40:1 or 50:1 gas-to-oil ratio.
Why does my trimmer keeps stalling?
A clogged carburetor is most commonly caused by leaving fuel in the string trimmer for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall.
What are the problems with a Bolens string trimmer?
If you have a Bolens string trimmer and it’s malfunctioning, you can follow the same troubleshooting procedure you would follow for most other brands. Common problems include hard starting, rough running or failure of the trimmer head to spin.
What kind of Weed Eater is a Bolens?
Bolens is a brand name from the MTD company that produces lawn and garden power equipment, such as walking mowers, riding mowers, tillers and trimmers. Trimmers are designed for more precision work around the yard, creating edges around a lawn and getting into places a mower can’t reach to remove weeds.
What to do if your Bolens Weed Eater won’t start?
Move the blue choke lever to position 3 and squeeze the trigger as you pull the starter rope if you suspect the reason it won’t start is a flooded engine. Replace the air filter or clean it off with warm soapy water if the engine won’t idle.
Where are the adjustment screws on a Bolens carburetor?
There are two adjustment screws on a Bolens carburetor instead of the three you usually find on a trimmer carburetor. They are located next to the carburetor, and the one closest to you is the one that probably needs adjusting using a special carburetor adjustment screwdriver.