What fluid do I use in my Allison Transmission?
Mobil Delvac 1 ATF is a fully synthetic fluid recommended by Allison Transmission, Inc. and approved against the Allison TES-295 and TES-468 Specifications. The fluid is designed to meet the demanding requirements of modern heavy-duty automatic transmissions.
Is dexron VI OK for Allison Transmission?
deXRon®-Vi shall not be used in allison 500, 600 or 700 series transmissions (at, mt, ht, ht/V/Clt products). C4 fluids are no longer recommended in any commercial on-highway transmissions.
What is the best transmission fluid for an Allison 1000?
Allison recommends TES 668™ Approved Fluids to extend drain intervals and enhance transmission performance and durability in all operating environments. Allison TES 668™ Approved Fluids are recommended for use in Allison 1000 Series™, 2000 Series™, 3000 Series™, 4000 Series™ and H 40/50 EP™ on-highway products.
Is TranSynd compatible with dexron III?
Castrol TranSynd can be recommended for all vehicles calling for Dexron III/Mercon or Allison TES 295 and TES 468 ATF’s suitable for bus and refuse vehicles with automatic transmissions.
Can you mix dexron VI with dexron-III?
Try not to mix DEXRON-III with DEXRON-VI, only because if you do that you are in fact diluting the DEXRON-VI fluid with a less stable product and therefore throwing away much of the advantage. All you need to remember is that DEXRON-VI is far superior to DEXRON-III.
What is TES-295 transmission fluid?
Kendall SHP 295 is a full synthetic, heavy-duty automatic transmission fluid that offers excellent friction durability to ensure smooth shifting, outstanding low-temperature properties for year-round use and easy shifting in cold weather, as well as rust and corrosion protection.
How often should you change Allison transmission fluid?
Allison says the fluid is good for 100,000 miles.
Is dexron vi full synthetic?
MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids.
What is TES 295 transmission fluid?
Can you mix Transynd and Dex 6?
Its ok to mix, I did mine last year and works just fine. They also told me to change the filter every 25k and the fluid every 100k. I think I will do them both every couple of years just to be safe.
What are the parts of an Allison 3000?
Allison 3000 Series, MD3060, MD3656 HARD PARTS 801A Piston, Lock-up Apply (MD3060) 1 MD3060.PIS01 NI Cover/Diaphragm With Seal (Converter) ….. 1 AT3000.COV01 806A Rollers, Converter One Way Clutch ….. 13 AT3000.OWC01 832E Filler Tube ….. 1 MD3060.TU01 Ni Washer, Stator OWC Front …..
What kind of fluids are used in Allison transmissions?
Allison Approved Fluids that are synthetic based offer improved viscosity that other fluids can’t offer. Only Allison Approved transmission fluids are formulated for the unique components of an Allison Automatic.
Can a tool not be used by Allison Transmission?
Accordingly, ANYONE WHO USES A SERVICE PROCEDURE OR TOOL WHICH IS NOT RECOMMENDED BY ALLISON TRANSMISSION OR THE VEHICLE MANUFACTURER MUST first be thoroughly satisfied that neither personal safety nor equipment safety will be jeopardized by the service methods selected.
What are the advantages of Allison TES 295?
Allison TES 295 approved fluids provide extended drain intervals and offer thermal and viscosity advantages over conventional petroleum based fluids, as well as other synthetic fluids. All Allison TES 295 approved fluids are synthetic based which offer improved viscosity that other fluids can’t offer.