How do you use jet Blazt?

How do you use jet Blazt?

DIRECTIONS FOR USE Add whole bottle of Jet Blazt directly to spa water filter inlet. Run spa with jets on (high speed) using all jets and water features for 5 to 10 minutes. Continue to run normally for at least 12 hours. Maintain water temperature at least at 100°F.

What is hot tub jet cleaner?

Jet Clean is a revolutionary low foaming hot tub chemical formula that quickly clears the inside of spa plumbing. Use this spa care equipment each time a spa or hot tub is drained and refilled to keep jets performing like new. This hot tub maintenance product is compatible with all spas, hot tubs and jetted tubs.

What does SPA purge do?

Cleans Where You Can’t! Spa Purge​ attacks the root cause of most spa maintenance problems- the buildup of non-living organic waste contamination! Oils, lotions, cosmetics, hair products, and other non-living organics build up in spa water to produce cloudiness, unpleasant odors, and foaming.

How do you use leisure time jet cleaner?

Directions

1. Remove filter and clean separately using Filter Clean.
2. Before spa is drained, add 1 bottle of Jet Clean to warm spa water.
3. Turn pump on and run the jets for 15 minutes (ensure that filter is not in spa).
4. Turn pump and jets off and let sit for 1 hour.
5. Turn pump on and run jets and blower for 15 minutes.

How do you use leisure time filter cleaner?

Directions

1. Remove grids or cartridges from filter.
2. In a clean, plastic pail, bucket or trash can that contains 8 gallons of water, add contents of Filter Clean.
3. Place cartridge or grids upright in solution.
4. Soak for a minimum of 3 hours.
5. Remove filter from solution.

How do you use spa jet cleaner?

Application

1. Remove Filter – Very Important.
2. Add 16 oz. jet clean to a full warm spa.
3. Run jets 15 minutes.
4. Turn jets off for 1 hour.
5. Run Jets 15 minutes.
6. Drain spa and rinse while draining.
7. Re-fill and re-start your normal spa chemical program.

How do you use the jet cleaner on a hot tub?

Hot Tubs:

1. Remove filter and clean separately using Filter Clean.
2. Before spa is drained, add 1 bottle of Jet Clean to warm spa water.
3. Turn pump on and run the jets for 15 minutes (ensure that filter is not in spa).
4. Turn pump and jets off and let sit for 1 hour.
5. Turn pump on and run jets and blower for 15 minutes.

Can I leave spa purge in for a few days?

It removes oily residues quickly and easily up to 800 gallons of water! This flush can be done in as little as 15 minutes for a quick clean up or you can leave it to do its job overnight on low speed for a deep cleaning effect.

How often should you purge your hot tub?

3 to 4 times a year
A hot tub should be purged 3 to 4 times a year and it’s great practice to purge the plumbing each time you drain the tub.

How do you use ahh?

This is a simple process. Add about 1 tablespoon (3 level teaspoons) of our gel to a 300 -350 gallon hot tub just prior to your maintenance purge. Use less or more according to your hot tubs water capacity. Run the pump(s) to attain maximum circulation.