What are the parts of a ceiling fan called?
8 Parts of a Ceiling Fan (with Illustrated Diagram)
- Motor.
- Motor Housing.
- Mounting Mechanism.
- Downrod.
- Fan Blades.
- Fan Blade Brackets.
- Flywheel.
- Lamps.
What is the fan part of a fan called?
blades
A fan consists of a rotating arrangement of vanes or blades, which act on the air. The rotating assembly of blades and hub is known as an impeller, rotor, or runner. Usually, it is contained within some form of housing, or case.
What does the inches mean on a ceiling fan?
Determine what the distance is from the tip of the first blade to the tip of the second blade. It will measure 32 inch or smaller, 34, 36, 38, 42, 44, 46, 48, 52, 54, 56, 58, 60 or even 70 inches across. The measurement of the ceiling fan will determine how large the path of the blades will be.
Where is the part number on a ceiling fan?
Location depends on the type of fan:
- For Downrod-mount fans- ID sticker located on top of the motor housing (facing the ceiling of an installed fan). Look for number immediately after “MOD”.
- For Low Profile (also called “Hugger”) fans- ID sticker is located on the mounting bracket.
What is the parts of electric fan?
Table fan: Basic elements of a typical table fan include the fan blade, base, armature, and lead wires, motor, blade guard, motor housing, oscillator gearbox, and oscillator shaft. The oscillator is a mechanism that motions the fan from side to side.
What are the parts of electric fan motor?
Motor – The heart of the fan consisting of the armature, bearings, windings, rotor, stator and shaft. Motor Adapter – Used to attach the downrod to the motor housing at the top of the motor. Motor Housing (Fan Housing) – Decorative outer casing for the motor that cannot be opened or it will void the warranty.
How many parts does a ceiling fan have?
A ceiling fan consists of a few basic parts, namely an electric motor with a housing, blades and the “irons” that hold most types in place, and a downrod or other mounting device. In addition, many fans are designed to receive decorative “fitters” beneath the blades that hold lamps and glass or crystal shades.
What are the different parts of an electric fan?
Rotor • It is a movable part of the motor which rotates.
Is 52 inch fan too big?
The ALA recommends a 29- to 36-inch fan for a room up to 75 square feet, such as a bathroom; a 36- to 42-inch fan for a medium-size room up to 144 square feet; and a 50- to 54-inch fan for a room around 225 square feet; 54- and 60-inch or larger fans are available for larger spaces.
How big are the blades on a 52 inch ceiling fan?
Ceiling Fan Size Guide
| Blade Span | Good for | Room Size |
|---|---|---|
| 29″ to 36″ | Bathrooms, Breakfast Nooks, Utility Rooms | Up to 75 sq. ft |
| 42″ to 48″ | Bedrooms, Kitchens, Dining Rooms | Up to 175 sq. ft |
| 52″ to 56″ | Large Bedrooms, Family Rooms, Media Rooms | Up to 350 sq. ft |
| 60″ or larger | Great Rooms, Other Large Spaces | More than 350 sq. ft |
Where is capacitor in ceiling fan?
The capacitor is usually a black box inside the switch housing of the fan. If the case appears burnt or melted in any way, that is also the sign of a bad capacitor and it should be replaced. Keep in mind that there may be other components in the circuit with the defective capacitor.
Where is fan model number?
Lay your fan on a flat surface to view the bottom of the product. You will see a black or blue ink stamp on the metal frame. You are specifically looking for the word MODEL, or letters MDL followed by a four to seven digit number. This number is your model number.
What are the replacement parts for ceiling fans?
Find replacement parts for custom ceiling fans, small ceiling fans along with indoor and outdoor fans. Hanging Bracket, Ball & Downrod and Canopy. Available in Antique Brass, Pure White or Weathered Brick. 1/2″ Nominal (7/8″OD) Downrod X 3″ long, threaded one end (fits both threaded and non-threaded fan couplers).
Where do I find the model number on my Ceiling Fan?
If this happens, simply use our online ceiling fan manual and parts finder. Enter your model number, typically located on the top of your fan motor on a Hunter tag, and we’ll find the right documentation for you. Hunter fan parts like light kits, downrods, replacement shades, and even specialty bulbs can keep your fan running right.
What are the different parts of a fan?
Bottom Cover (Case Cover) – Decorative cover on the bottom of the motor which normally has slots or holes. The bottom housing. Break Away Connector – Connects the fandangle and chain to the chain from the fan. Canopy – Decorative cover that is shaped like a bowl and is used to cover the wiring between the ceiling and the fan.
What’s the name of the fan that mounts to the ceiling?
Flush Mount Fan (Ceiling Hugger) – Fan that mounts directly to the ceiling without a pipe (downrod). Grille Filter – Motor mesh used to cover holes or slots in the fans bottom cover. Grommet – Rubber cushions that are inserted into the holes in the blades to reduce the fan noise.