How thick is GT2 belt?
Often used for precision 3D printers and CNC machines. This belt is 1164mm long (582 teeth on a 2mm tooth pitch) and is 6mm wide.
How do you read a timing belt size?
The first set of numbers in most cases will indicate the pitch length of the belt. In this case, the pitch length is 640 mm. In MXL pitches, some companies use the first number as the pitch length but most companies indicate the number of teeth on the timing belt.
What is a GT2 belt?
GT2 timing belts are intended for lower load applications such as the first reduction in a gearbox, or motor to flywheel. These belts go hand in hand with GT2 timing pulleys, and are great for low-load applications.
How do you read a belt specification?
Automotive belts start with either 4L (12.5mm wide) or 3L (9.5mm). The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside.
How is pulley timing measured?
Using the most accurate tool available, measure from the crown of one tooth to crown of the next tooth. This measurement is the tooth pitch. Other information that will assist in finding the tooth pitch and profile is the part number of the timing belt running on the pulley. Count the number of teeth on the pulley.
What is GT2 pulley?
The GT2 series of belts and pulleys are designed specifically for linear motion. They use a rounded tooth profile that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove.
What is a GT2 pulley?
Product Details. The GT2 series of belts and pulleys are designed specifically for linear motion. They use a rounded tooth profile that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove.
What does GT2 mean?
Acronym. Definition. GT2. Gran Turismo 2 (video game)
What do the numbers mean on a belt?
The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside. The number following it is the inside length in inches.
How are GT2 belts designed for linear motion?
The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. See Belts and Pulleys . See Belts and Pulleys .
What makes the GT2 timing belt so good?
The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove.
How big is a 2mm timing belt pitch?
2mm – GT®2 Timing Belts Part Number No. Of Grooves Belt Width 3 mm 6 mm 9 mm Pitch Length A 6R51M038060 38 6 76 A 6R51M050060 50 6 100 A 6R51M056030 56 3 112 A 6R51M066060 66 6 132
Which is better PowerGrip GT2 or GT3 belts?
The PowerGrip GT3 Belt Drive System is the newest design and offers additional benefits over GT2. The improved construction and material compound provides superior load bearing capacity. The GT2 Belts are being phased out and replaced by the new GT3 Belt Drive System