How do I manage my HP ProCurve switches?

How do I manage my HP ProCurve switches?

How to: Configure a HP ProCurve switch

1. Step 1: Connect your serial connection.
2. Step 2: Conenct PuTTY.
3. Step 3: Get the IP address.
4. Step 4: Set time server.
5. Step 5: Set SNMP community info.
6. Step 6: Launch the web GUI.
7. Step 7: Configure basic info.
8. Step 8: Create VLANs.

How do I connect my ProCurve switch?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

What happened to HP Procurve switches?

The HP 2920 series (1G stackable PoE layer 2 switches) are now branded as “Aruba 2920”. Most of the same part numbers apply. Aruba 2920 quickspecs. The 3800 series (1G stackable PoE layer 3 switches) are now branded as “Aruba 3810M”.

What happened HP Procurve?

HP ProCurve was the name of the networking division of Hewlett-Packard from 1998 to 2010 and associated with the products that it sold. The name of the division was changed to HP Networking in September 2010 after HP bought 3Com Corporation.

What is HP Procurve Switch?

The HP Procurve managed 24-port switch has 10/100BASE-TX autosensing per port and 2 open transceiver slots for media flexibility. The HP Procurve switch 2524 is ideal for low-cost, managed 10/100 connectivity with uplinks. features.

How do I log into my HP Procurve Switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I assign an IP address to my HP Procurve Switch?

HP Procurve Switch # [Tab] to the IP Config (DHCP/Bootp) field and use the Space bar to select the Manual option. [Tab] to the IP Address field and enter the IP address that is compatible with your network. [Tab] to the Subnet Mask field and enter the subnet mask used for your network.

What are the ports on the HP ProCurve switch 2124?

Power LED Fault LED 10/100Base-TX RJ-45 ports LED Mode Select button and indicator LEDs Reset button Slot for HP 100-FX SC Transceiver Link and Mode LEDs for each port All 10/100Base-TX RJ-45 ports have the “HP Auto-MDIX” feature 1-3 Introducing the HP Procurve Switch 2124

What kind of serial port do I need for HP switch?

Older switches such as the 2900-48G’s have a 9 pin serial connector on the back of the switch, newer switches have an RJ-45 connection on the front and use a serial> RJ-45 cable. If your laptop does not have have a serial port, you can use a USB-serial adapter.

How many ports does HP ProCurve 1810g-24 switch have?

Make sure this fits by entering your model number. Dual-personality ports (1810G-24 switch): two 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH, or 100-FX

What do you need to know about HP ProCurve?

• HP ProCurve Advanced Configuration and Management Guide – contains advanced configuration information for routing protocols and Quality of Service (QoS). In addition, appendixes in this guide contain reference information for network monitoring, policies and filters, and software and hardware specifications.