What is the best wood for fascia boards?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
What size wood is used for fascia board?
You construct fascia boards out of 1-by lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight.
What is the difference between a fascia and a barge board?
Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.
How thick should a fascia board be?
Replacement fascias do vary in thickness by manufacturer, but the rule of thumb is that to qualify structurally as a replacement board they should be somewhere between 16mm and 25mm thick – our most common range is the 18mm Replacement Fascia.
What kind of wood is used for eaves?
Probably the most common wood used for eaves is cedar. There are different kinds of cedar to choose from, including Eastern White Cedar, Red Cedar, and Yellow Cedar. The composition of them of the same, but the style is different. This option is affordable, durable and easy to install.
When should fascia boards be replaced?
How Do I Know When To Replace My Fascia and Soffits?
- Soft patches in wood, which means rot or holes are appearing.
- Crackled, flaking paint, which is a general sign of age.
- Evidence of animals and rodents; mice, rats and squirrels can take up home in the smallest of openings and be a sign your roofline is deteriorating.
What is behind a fascia board?
Soffit. The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area.
What is the board behind the fascia called?
Soffit is the layer of wood, vinyl or aluminum that extends from the bottom of the fascia to the top piece of your wall board. Together, they protect the rafters from weather, moisture, and allow air to flow through soffits and vents.
What do you need to know about fascia boards?
Fascia is a specific type of trim, which is installed just below the roof line. It helps to cover the soffit, and provides a more finished appearance for the roof and eaves of the home. These boards may vary in width, but is generally a slightly wider or thicker version of the same trim used on the rest of the home.
Which is the best wood for fascia trim?
One good alternative to these materials is to use preservative-treated wood as the fascia board and trim. Preservative-treated and primed Belco XT Trim products help resist issues that lead to wood rot. This preservative treated and primed wood fascia trim can stay protected and looking its best for greater lengths of time.
Can you use preservative treated wood for fascia?
Very cold climates can cause the material to become brittle. Which means fascia to crack, and the ultimate failure of the area. One good alternative to these materials is to use preservative-treated wood as the fascia board and trim. Preservative-treated and primed Belco XT Trim products help resist issues that lead to wood rot.
Why do you need drip edge trim on fascia boards?
The drip edge board serves the purpose of preventing moisture traveling from the edge of the roofing material under the fascia boards causing conditions for rot to occur. The drip edge trim moves rain water from the roof edges to the face of the drip edge material and onto the face of the fascia. More To Consider When Choosing Fascia Boards