How do I put my PLT Bluetooth in pairing mode?

How do I put my PLT Bluetooth in pairing mode?

Start with your headset powered on. Press and hold the call control button for 5 or 6 seconds until the light starts flashing red and blue (some models flash red and white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.

How do I reset my Plantronics BackBeat fit?

To reset your BackBeat GO/BackBeat GO 2: Press the volume up and volume down buttons at the same time. The light flashes rapidly 3 times, and then the headset turns off. When you turn on the headset, it automatically goes into pairing mode (flashing red and blue) so that you can pair it with your phone or other device.

How do I pair my Plantronics headset to my phone?

To pair the headset,

1. Turn on your device’s Bluetooth feature.
2. Turn the headset on. The light on the headset should start flashing an alternating red-blue.
3. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
4. If prompted for a passkey, enter 0000 (four zeros).

How do you sync Plantronics headphones?

Press and hold the Call button until the LEDs flash red and blue. Activate Bluetooth on your device and set it to search for new devices. Select “PLT_BBTPRO”. The headset LEDs stop flashing upon successful pairing.

How do I pair Plantronics Bluetooth headphones?

To pair your BackBeat FIT to your phone: Activate Bluetooth on your phone and set it to discover new devices. To do so: iPhone users click Settings > Bluetooth > On. Android users click Settings > Wireless & Networks > Bluetooth: On > Scan for devices.

How do I turn on my Plantronics BackBeat fit?

Power on the headphones by pressing the power button until you hear “pair mode” and the LED light flashes red and blue. NOTE *Menus may vary by device. Select “PLT_BBFIT.” If necessary, enter four zeros (0000) for the passcode or accept the connection.

How do I pair my Plantronics BackBeat Go?

With the headset powered off, press and hold the Center button until you hear “pairing.” NOTE You can connect up to 2 devices to your headset. Get the most from your headset by downloading our free app, BackBeat for iOS/Android™.

How do I reset my Plantronics BackBeat Bluetooth headset?

To reset your BackBeat GO/BackBeat GO 2: Press the power button for about 5-6 seconds until the indicator light starts flashing red and blue. Press the volume up and volume down buttons at the same time. The light flashes rapidly 3 times, and then the headset turns off.

How do I Pair my backbeat fit to my phone?

To pair your BackBeat FIT to your phone: Starting with your headset powered off, press and hold the power button until the LED flashes red and blue. Activate Bluetooth on your phone and set it to discover new devices.

Why are my backbeat fit headphones not pairing?

I’d recommend performing a restart on your Ionic. Then, out the headphones on pairing mode and try to pair them again. This has helped other users in the past. Also, make sure no other Bluetooth devices are nearby. They may be interrupting the signal causing the pairing process to fail.

How do I increase the volume on my backbeat headset?

Press the Audio button twice. Press the Audio button until you hear the confirmation tone to restart the current track. Press the button twice (each press until the confirmation tone sounds) to go to the previous track. To increase the volume, tap the Volume button.

How to enter pairing mode on Plantronics headphones?

To enter pairing mode after the first pairing process, start with the headphones powered off and then press and hold the Power button until you hear “pairing.” 05-31-2019 11:53