How do I charge my Plantronics headset?

How to Charge a Plantronics Bluetooth Charger

Plug the small end of your Plantronics charger into the charging port on your Bluetooth headset.
Insert the AC adapter into a wall outlet. You should see a light on the Bluetooth headset.
Allow the headset to charge for at least 2 hours.

How does the Plantronics Voyager 5200 charge?

It takes approximately 90 minutes to fully charge the headset; the indicator light turns off once charging is complete. A micro USB cable is supplied to allow you to charge the headset with an AC wall charger (not included) or through a PC’s USB port. The PC must be powered on to charge via USB 2.0 or higher.

How do you charge a Plantronics Voyager Bluetooth headset?

Your new headset has enough power to pair and make a few calls before charging is needed, though you may charge at any time. 1 Align snap-fit magnetic areas of headset and USB cable. 2 Attach cable to USB wall charger or laptop for 90 minutes. LEDs turn off once fully charged.

How do I know if my Plantronics Voyager is charging?

Voyager 510 Indicator light flashes red while charging and turns solid blue when charged. It takes approximately 3 hours to fully charge. Explorer 220, 330, 340, and 350 Indicator light is solid red while charging and turns off when charged. It takes approximately 2 hours to fully charge.

How do you charge a Plantronics 505?

To charge your Explorer 500/505:

Plug the USB end of the charge cable into a PC or an AC adapter.
Plug the micro USB end of the cable into your headset.

How do you charge a Plantronics wireless?

Charging Your Headphones or Bluetooth Adaptor

Plug the AC charger into a power outlet.
Connect the charger cable to the headphones or Bluetooth adaptor.
Charge each for at least 1 hour before first time use, or 3 hours to fully charge. The LED indicator glows red while charging.

How do you tell if Plantronics Voyager 5200 is charging?

Check the charge case battery level by pressing the charge case button and viewing the LED inside the case. A fully charged case can recharge your headset fully two times for an additional 14 hours of headset talk time. protect the battery.

How long does it take to charge a Plantronics Voyager Legend?

charge will take 90 minutes. You may leave your headset connected to the charger once charging is complete without harming the battery. Charge the case for 90 minutes before docking your headset.

How do I know if my headset is charging?

To charge the Bluetooth headset: The indicator light will turn on when the battery is charging. It may take up to 1 minute for the light to turn on. 3. When the headset’s battery is fully charged (about 2-3 hours), the indicator light will turn off.

How do I check the battery on my Plantronics headset?

You will hear the available talk time when you turn on the headset, as well as at the end of each call. Check the Battery Level in Between Calls: Tap the Voice Recognition button. After the “Say a command” voice prompt, say, “Check battery.”

How do I setup my Plantronics Explorer 505?

With the headset turned on, press and hold the call control button until you see the headset indicator light flash an alternating red and blue. Activate Bluetooth® on your phone and set it to search for new devices. Select “PLT_E500″. If necessary, enter four zeros (0000) for the passcode or accept the connection.

How can I check the battery on my Plantronics headset?

There are multiple ways to check the battery level of the headset: • Listen to voice prompts on the headset by pressing the Call button. • Check the LED indicators on the headset or charging case. • Use the Plantronics Hub application for desktop or mobile. You can download the software by visiting poly.com/software.

How to put a Plantronics wireless headset in pair mode?

On both the Input and Output tabs, select Plantronics BT600. 1To put your headset in pair mode, press and hold the Call button until you hear “pairing” and the headset LEDs flash red and blue.

How to set Plantronics bt600 as default device?

1To conﬁgure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Plantronics BT600,set it as the Default Device and click OK. 2To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter. Mac