Can you use Hive heating without a hub?
For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.
What does no RF on Hive mean?
No radio frequency
If your thermostat says ‘No RF’, it means ‘No radio frequency’ and has lost connection to the Hive Receiver.
Does Hive heating work with any supplier?
Hive is compatible with all energy suppliers and will continue to work once you switch.
Does Hive need hub?
Yes. The Hub is the heart of your Hive system and allows you to control your devices remotely.
What does no mean on a thermostat?
When the room is ‘cold’ then the com will be connected to N.O. so that the heat comes on, but the other terminal (n.c.) will now be open and that is ‘normal’ for cooling systems. So they do switch round in meaning right enough.
Why is my Hive heating not coming on?
Check that your broadband connection is working and that your Hive Hub is showing a green light. 2. Check that your Hive Thermostat is available in your app. Once you have verified the furnace has power, try removing the thermostat body from the wall and check that all the wires are connected securely to the terminals.
Can you still use Hive without British Gas?
Do I need to be with British Gas to have Hive? No, any Hive products can be installed no matter who provides your energy.
Is Hive just for British Gas customers?
Do you have to be a British Gas customer to be able to use Hive products and services? No, you can buy Hive products and services regardless of who provides your energy.
Why is my Hive not connecting?
Check that your Hive hub is connected to the mains power socket and switched on. 4. Check any Signal Boosters (formerly known as SmartPlugs) you have are switched on and in the recommended location. For Hive Active Plugs check that the electrical device you have plugged into your Hive Active Plug is switched on.
Why is my hive hub not connecting?
Unplug Hub 360 from the wall socket and reinsert it, wait for the hub to reboot (this can take about 10 minutes) then refresh the Hive app dashboard page in the app. Step 4. You can reconnect the hub to your Wi-Fi by going to your Hive app, tap the Hub 360, Settings, Change Wi-Fi, and follow the in app instructions.
What does it mean when your hive thermostat says no RF?
If your thermostat says ‘No RF’, it means ‘No radio frequency’ and has lost connection to the Hive Receiver. To fix this, try the below steps: Press the two buttons on the sides of the thermostat and slide it up and off the wall. Take your thermostat to the receiver which you will find near to your boiler/hot water tank.
What can I do if my hive is not working?
1. Check our service status page ( status.hivehome.ie) to see the status of the Hive app and website. 2. Check that your broadband connection is working. 3. Check that your Hive hub is connected to the mains power socket and switched on.
How do I connect my hub to my hive?
In order to connect the receiver to the hub, you will need put the hub into pairing mode. You can do this by selecting ‘Install devices’ within the Hive app menu.