How do I get my HP manual feed tray to print?

How do I get my HP manual feed tray to print?

Printing using manual feed

1. Make sure that the product is idle and the Ready light is on.
2. Access the product Properties dialog box.
3. Click the Paper/Quality tab.
4. Select Manual Feed from the Source is drop-down list.
5. Load paper or an envelope into the priority feed slot, depending on the print job.

How do I load paper into my HP Officejet Pro 8600?

To load cards and photo paper Use these instructions to load photo paper.

1. Pull out Tray 1.
2. Insert the media print-side down in the center of the tray.
3. Slide the media guides in the tray to adjust them for the media size that you have loaded, and then reinsert the tray.
4. Pull out the extension on the output tray.

How do I turn off manual feed on HP printer?

In the Properties window, select the Paper/Quality tab, select Automatic or the appropriate tray from the Source is: drop-down list, and then click Apply. note: Do not select Manual Feed from the drop-down list. Click Apply to accept the settings, and then click OK to exit the Properties window.

What is ADF on HP printer?

HP Officejet Pro 8600 Printers – The Automatic Document Feeder (ADF) Does Not Pick Paper.

How do I change my printer from manual feed?

Select Print Settings from the print options pop-up menu. Click Basic and select Auto Select or Tray1 for Paper Source. Click Print. The Auto Select setting will automatically pull paper from any paper source (tray or manual feed slot) that has a defined paper size that matches your document.

How do I load a 4×6 paper into my HP OfficeJet Pro printer?

Load photo paper or cards into the input tray before you print.

1. Pull out the input tray.
2. Slide out the paper-width guides as far as possible.
3. Insert the stack of paper or cards print side down in portrait orientation, and then load the stack in the center of the input tray.

Why is my printer saying manual feed?

“Manual Feed” is an indication that your machine’s Tray Setting or the paper source in the printer driver has been set to Manual Feed, but there’s no paper loaded in the manual feed slot. Load a sheet of paper in the manual feed slot. The document should print and clear the error message.

How do I open the ADF cover on my HP Officejet Pro 8600?

Clean the separator pad using the same cloth. Firmly close the ADF cover. Try using the ADF again….Step 2: Clean the ADF pick rollers.

HP Officejet Pro 8600 Printer	HP Officejet Pro 8600 Plus and Premium printers
ADF cover Rollers Separator pad	ADF cover Rollers Separator pad

Can you not put paper in manual feed?

Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam. If you put any Media (paper, transparency and so on) in the manual feed slot before the machine is in the Ready state, the media may be ejected without being printed on.