How do you change the battery in a safety first ear thermometer?

How do you change the battery in a safety first ear thermometer?

3. Gently pull ear up and back to straighten the ear canal. Insert the thermometer until the probe tip seals the ear canal. * For children under 1 year: Pull the ear straight back….the battery is exhausted and needs replacing.

1. Use a small screwdriver to loosen screw.
2. Press release tab with a small tool and slide battery.

How do you calibrate a safety first ear thermometer?

Top up the broken ice with a bottle. Give a little clean water and mix until the glass is finished. Wait about three minutes before slipping the sensor into the ice-filled water onto the thermometer. Wait 30 seconds or so and test that the thermometer reads 32-degrees Fahrenheit.

How do you replace a safety first thermometer?

To change your thermometer from Celsius to Fahrenheit press the ON/OFF button to turn the unit off, then press and hold the ON/OFF button for at least 2 seconds. When you stop pressing the ON/OFF button after 2 seconds, the current measurement scale will display. To change, press the ON/OFF button again.

What does l mean on safety first thermometer?

The “L” means that the thermometer is at its lowest point and ready to take your temperature. It does not mean the battery is low. There is a separate low battery icon that will display all by itself when the battery is low.

How do I reset my ear thermometer?

Reset your Smart Ear Thermometer:

1. Slide the battery cover down then pull it away to expose the battery compartment.
2. Remove the batteries.
3. Wait 10 seconds.
4. Put the batteries back in, the same as they were before.
5. Push the button to turn on the thermometer.

How do I know if my ear thermometer is working?

The sensor should be pointing down the ear canal and not at the wall of the ear. Once the thermometer is in position, turn it on and wait for it to signal that the reading is complete.

How do I change my safety 1st ear thermometer from Celsius to Fahrenheit?

Hi shay shay, to change to Fahrenheit or Celsius first switch off the thermometer. Whilst it is off press and hold the button for 3-5 seconds until you see F in the LCD screen. It will now read in Fahrenheit.

What does L on an ear thermometer mean?

An L or LO error message means that the Smart Ear thermometer is reading a temperature outside of its normal range. There are a few things which can cause low readings, but the most common are earwax and improper technique, so let’s rule these out first. Make sure to wait for the thermometer to dry before using again.

How do you read a Safety 1St thermometer?

Line up the red LED dots directly on your child’s forehead. When the dots are directly over one another, you’ll know the thermometer is at the right distance and you can press the read button. In just one second, you’ll hear the beep that lets you know the reading is complete.