What does f1e4 mean on a microwave?
The oven could not execute the function. There may a problem with the Appliance Control Board, or the associated wiring. Power unit down by turning off the circuit breaker(s) for one (1) minute.
What does EO F2 mean on Whirlpool?
The “F2-EO” fault code indicates a shorted keypad. The electronic range control (ERC) will need to be replaced. I recommend calling a service technician to diagnose and repair your range.
What does it mean when your oven says f2e1?
The F2 E1 error code (see images below) means the key tail (ribbon cable for the touchpad) is unplugged or damaged. The tech sheet advises us to check the wiring and connections, and if this does not make the error go away, it then suggests that you replace the keypad.
What does f2e1 mean on a Whirlpool stove?
F2-E1 – Touch Pad (Keypad) Cable Unplugged – Check the connection between the touch pad (keypad) and control board (clock) to make sure it is secure. Select the ‘cancel’ function and wait 60 seconds. If error code reappears then replace the touch pad, or touch pad and control board (clock) if all one assembly.
How do I reset my Whirlpool microwave?
Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started. Press it when the cooking complete reminder appears on the display, for example, and the “Your Food is Ready” message will disappear.
What does E2 F3 mean on Whirlpool?
An E0-F3 error indicates that the oven’s temperature sensor is open; E1-F3, that the temperature sensor is shorted; E2-F3, that the oven temperature has exceeded the maximum rated 575 degrees Fahrenheit in “Cook” mode; and E3-F3, that the oven temperature has exceeded the maximum rated 950 degrees Fahrenheit in “Clean” …
What does F3 mean on Whirlpool?
oven temperature sensor probe
The F3 error code on most Whirlpool ranges indicates that you have a problem with the oven temperature sensor probe. You will normally need to. unplug the range. and replace the oven temperature sensor probe to fix this type of problem.
How do I fix error code f2e1?
It means either a key is shorted/stuck or the control can’t “see” the keypad. Sometimes just unplugging the ribbon cable from the keypad to the control and plugging it back in will fix it for a while.
What does f1e1 mean on a whirlpool washer?
Troubleshooting and Repair – F1E1 Error Code – WFW75HEFW The Whirlpool Washer F1E1 error means the ACU (main control board) memory is corrupted or another critical ACU failure has occurred. It’s possible that a power surge or a drop in voltage caused the issue. Unplug the washer for 1 minute and plug it back in.
What’s the power relay code on a whirlpool microwave?
Whirlpool Microwave oven has a code F1E4 NW POWER RELAY. model WMH32419CT1. 2004 WMH32519CT1. Can’t closed the – Answered by a verified Appliance Technician
When do I get a whirlpool fault code F02?
Replace failed component. If the drain time exceeds 8 minutes, the water valves are turned off and F02 is flashed. Press PAUSE/CANCEL twice to clear the display. NOTE: After 4 minutes the “Sud” error will be displayed, then 4 minutes later the F02 error code will be displayed.
What is the code for a whirlpool microwave oven?
Whirlpool Microwave oven has a code F1E4 NW POWER RELAY. model WMH32419CT1. 2004 WMH32519CT1. Can’t closed the – Answered by a verified Appliance Technician We use cookies to give you the best possible experience on our website.