What is the difference between architectural drawings and shop drawings?
As-built drawings can be made for the whole building as well as for specific components. But the shop drawings are only made for the different components of a building. Both types of drawings are not a part of the contract documents. They can be or cannot be included in the contract.
Do architects approve shop drawings?
Shop drawings are often specified for parts of a project which are included in the contract documents in design drawings or performance specifications and for which the architect has left the manufacture, fabrication or construction to the discretion of the contractor but for which the architect retains the right of …
What is meant by shop drawings?
A shop drawing is a drawing or set of drawings produced by the contractor, supplier, manufacturer, subcontractor, consultants, or fabricator. Shop drawings are typically required for prefabricated components. The shop drawing normally shows more detail than the construction documents.
What is the difference between IFC drawings and shop drawings?
Shop drawing is a drawing that is produced by the contractor, subcontractor, manufacturer, fabricator or the supplier whereas IFC (Issued for Construction) is a type of drawing issued to the contractor by the client or his/her representative. Drawings are the cornerstone of every construction.
Do shop drawings supersede contract drawings?
The fabricator’s drawings are then given to “the shop” for use in making the component – thus the name “shop drawing.” As one court stated, “shop drawings are the final word as to how the work should proceed on the job, and supersede the architectural plans.”
What are architectural drawings called?
Prints of architectural drawings are still sometimes called blueprints, after one of the early processes which produced a white line on blue paper.
When approving shop drawings do the architect need to check?
The architect’s review and approval is limited to “checking for conformance with information given and the design concept expressed in the Contract Documents.” AIA A201 Par. 4.2. 7 (2017). When the shop drawing is returned “approved” by the architect, then the contractor can order or fabricate that item.
Does the architect need to approve the sub contractor’s shop drawings?
The architect will rarely have any obligation to approve a sub-contractor’s shop drawings unless the sub-contractor has a design obligation or the contract documents expressly require the architect to approve such drawings.
Do shop drawings need to be stamped?
Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What is an IFB drawing?
IFB – Issued for Bid. IFC – Issued for Construction. IFF – Issued for Fabrication. IFMP – Issued for Material Purchase. IFP – Issued for Permit.
Are shop drawings stamped?
Mark Gilligan SE, Shop drawings that are derived from seperate design drawings need not be sealed and stamped by a design professional. The design professionals retained by the Owner should not seal and sign the drawings prepared by the contractor.
What do you mean by architectural shop drawings?
Typically Architectural Shop Drawings are described as a set of drawings produced by the contractor, supplier, manufacturer, subcontractor, or fabricator. Shop drawings are typically required for pre-fabricated components.
Who are the people who make shop drawings?
Shop drawings might be prepared by contractors, subcontractors, suppliers, manufacturers or fabricators. They generally relate to pre-fabricated components, showing how they should be manufactured or installed.
Do you need a shop drawing before building?
Definitely. Getting shop drawings drawn or documented should be one of the first to-dos on your checklist before your project kicks off. You will know your building’s design, installed components and specific details inside out, long before the construction begins.
What’s the difference between a shop drawing and a fabrication drawing?
Shop drawings, on the other hand, are used by fabricators to know how the components will be manufactured and installed during the construction process. What is a shop drawing? Shop drawings (also known as fabrication drawings) are detailed plans that translate design intent.