How do I access BIOS on Compaq?

How do I access BIOS on Compaq?

Press “F10” when the Compaq logo appears on your screen. This will cause the system to boot into the BIOS configuration mode. If this does not work then press the “F1” key until the system boots into BIOS.

How do I get into BIOS with power button?

You can check these settings by accessing BIOS Setup using the power button menu method:

1. Make sure the system is off, and not in Hibernate or Sleep mode.
2. Press the power button and hold it down for three seconds and release it. The power button menu should display.
3. Press F2 to enter BIOS Setup.

How do I know what my BIOS key is?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

How do I setup BIOS?

How to enter the BIOS on a Windows 10 PC

1. Navigate to Settings. You can get there by clicking the gear icon on the Start menu.
2. Select Update & Security.
3. Select Recovery from the left menu.
4. Click Restart Now under Advanced startup.
5. Click Troubleshoot.
6. Click Advanced options.
7. Select UEFI Firmware Settings.
8. Click Restart.

How do I get to the boot menu on a Compaq?

Press “F10” if you see a startup menu, which appears on most newer Compaq Presario laptops. The system then boots into BIOS.

How do I get to BIOS setup utility?

Access the BIOS Setup Utility using a series of key presses during the boot process.

1. Turn off the computer and wait five seconds.
2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
3. Press f10 to open the BIOS Setup Utility.

How do you set BIOS to default setting?

Reset the BIOS to Default Settings (BIOS)

1. Access the BIOS Setup utility. See Accessing BIOS.
2. Press the F9 key to automatically load the factory default settings.
3. Confirm the changes by highlighting OK, then press Enter.
4. To save the changes and exit the BIOS Setup utility, press the F10 key.